RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

ALMOSA Telemetry

This is the latest recevied telemetry packets stored in our database for station/object ALMOSA. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

Time	Value1*	Value2*	Value3*	Value4*	Value5*
1734966946	123	122	64	37	126
1734965147	122	122	64	37	126
1734963346	122	122	63	38	126
1734957947	122	122	64	37	126
1734939947	124	124	65	37	126
1734936347	125	124	65	37	126
1734929146	125	124	65	37	126
1734925546	125	125	65	38	126
1734923746	126	125	65	38	126
1734921946	126	125	65	38	126
1734920147	126	125	65	38	126
1734909347	128	127	66	38	126
1734907547	143	140	71	41	127
1734902147	182	143	74	42	127
1734900347	209	149	75	43	127
1734894947	202	144	73	42	127
1734891347	204	148	75	42	127
1734884147	147	143	73	42	127

*Used Equation Coefficients:

Value1: 0, 1, 0

Value2: 0, 1, 0

Value3: 0, 1, 0

Value4: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)