This is the latest recevied telemetry packets stored in our database for station/object W6MAF-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1734924443 | 122 | 92 | 255 | 96 | 68 |
| 1734892868 | 124 | 111 | 255 | 86 | 52 |
| 1734892747 | 124 | 111 | 255 | 86 | 52 |
| 1734892263 | 124 | 110 | 255 | 87 | 53 |
| 1734892142 | 124 | 110 | 255 | 87 | 53 |
| 1734888632 | 139 | 103 | 255 | 90 | 57 |
| 1734888510 | 140 | 102 | 255 | 91 | 58 |
| 1734886090 | 139 | 81 | 255 | 104 | 83 |
| 1734876010 | 121 | 89 | 255 | 100 | 76 |
| 1734875526 | 121 | 84 | 255 | 103 | 75 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)