RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

OD5RI-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object OD5RI-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1730424085	13.8 Volt	20 Pkt	10 Pkt	100 Pcnt
1730422885	13.8 Volt	20 Pkt	10 Pkt	93 Pcnt
1730422285	13.73 Volt	20 Pkt	10 Pkt	84 Pcnt
1730421085	13.65 Volt	20 Pkt	10 Pkt	75 Pcnt
1730420485	13.65 Volt	20 Pkt	10 Pkt	66 Pcnt
1730419885	13.58 Volt	20 Pkt	10 Pkt	67 Pcnt
1730419285	13.73 Volt	20 Pkt	10 Pkt	65 Pcnt
1730418685	13.73 Volt	10 Pkt	10 Pkt	75 Pcnt
1730418085	13.65 Volt	10 Pkt	10 Pkt	72 Pcnt
1730417485	13.58 Volt	10 Pkt	10 Pkt	100 Pcnt
1730416885	13.5 Volt	10 Pkt	10 Pkt	100 Pcnt
1730415685	13.43 Volt	20 Pkt	10 Pkt	95 Pcnt
1730415085	13.43 Volt	20 Pkt	10 Pkt	95 Pcnt
1730414485	13.5 Volt	20 Pkt	10 Pkt	95 Pcnt
1730413884	13.5 Volt	20 Pkt	10 Pkt	95 Pcnt
1730413285	13.5 Volt	20 Pkt	10 Pkt	91 Pcnt
1730412685	13.58 Volt	20 Pkt	10 Pkt	90 Pcnt
1730409685	13.65 Volt	10 Pkt	10 Pkt	54 Pcnt
1730408484	13.73 Volt	20 Pkt	10 Pkt	69 Pcnt
1730407886	13.65 Volt	20 Pkt	10 Pkt	71 Pcnt
1730407286	13.65 Volt	30 Pkt	10 Pkt	75 Pcnt
1730406085	13.8 Volt	30 Pkt	10 Pkt	60 Pcnt
1730405486	13.65 Volt	20 Pkt	10 Pkt	57 Pcnt
1730404885	13.73 Volt	20 Pkt	10 Pkt	48 Pcnt
1730404286	13.73 Volt	20 Pkt	10 Pkt	46 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)