RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

TA7MHZ Telemetry

This is the latest recevied telemetry packets stored in our database for station/object TA7MHZ. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	RxDrop*	RSSI*	Voltage*
1735131481	9 Pkt	5 Pkt	-80 dBm	0.02 V
1735131112	6 Pkt	5 Pkt	-79 dBm	0.02 V
1735130746	8 Pkt	9 Pkt	-78 dBm	0.02 V
1735130394	4 Pkt	5 Pkt	-79 dBm	0.02 V
1735130012	5 Pkt	8 Pkt	-79 dBm	0.02 V
1735129646	3 Pkt	8 Pkt	-79 dBm	0.02 V
1735129278	3 Pkt	8 Pkt	-78 dBm	0.02 V
1735128934	3 Pkt	7 Pkt	-79 dBm	0.02 V
1735128544	2 Pkt	8 Pkt	-78 dBm	0.02 V
1735128177	10 Pkt	7 Pkt	-79 dBm	0.02 V
1735127810	2 Pkt	5 Pkt	-79 dBm	0.02 V
1735127443	3 Pkt	3 Pkt	-78 dBm	0.02 V
1735127081	3 Pkt	8 Pkt	-79 dBm	0.02 V
1735126710	5 Pkt	5 Pkt	-80 dBm	0.02 V
1735126343	4 Pkt	6 Pkt	-84 dBm	0.02 V
1735125977	2 Pkt	8 Pkt	-79 dBm	0.02 V
1735125610	4 Pkt	6 Pkt	-82 dBm	0.02 V
1735125244	2 Pkt	9 Pkt	-79 dBm	0.02 V
1735124877	5 Pkt	9 Pkt	-79 dBm	0.02 V
1735124510	8 Pkt	5 Pkt	-81 dBm	0.02 V
1735124143	2 Pkt	5 Pkt	-81 dBm	0.02 V
1735123776	4 Pkt	6 Pkt	-78 dBm	0.02 V
1735123410	4 Pkt	7 Pkt	-79 dBm	0.02 V
1735123042	2 Pkt	6 Pkt	-80 dBm	0.02 V
1735122677	4 Pkt	9 Pkt	-81 dBm	0.02 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)