This is the latest recevied telemetry packets stored in our database for station/object DK1IZ. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp* | Humi* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1734971014 | 25.4 deg C | 32.9 % | 0 | 0 | 0 |
| 1734970114 | 25.9 deg C | 33.4 % | 0 | 0 | 0 |
| 1734969214 | 25.8 deg C | 32.8 % | 0 | 0 | 0 |
| 1734968313 | 25.6 deg C | 32.8 % | 0 | 0 | 0 |
| 1734967413 | 25.3 deg C | 32.8 % | 0 | 0 | 0 |
| 1734966513 | 25 deg C | 32.5 % | 0 | 0 | 0 |
| 1734965776 | 25.7 deg C | 33.6 % | 0 | 0 | 0 |
| 1734964880 | 25.6 deg C | 33.8 % | 0 | 0 | 0 |
| 1734963981 | 25.6 deg C | 33.9 % | 0 | 0 | 0 |
| 1734963084 | 25.7 deg C | 34 % | 0 | 0 | 0 |
| 1734962181 | 25.6 deg C | 34.2 % | 0 | 0 | 0 |
| 1734961285 | 25.3 deg C | 34.6 % | 0 | 0 | 0 |
| 1734960390 | 24.9 deg C | 35.2 % | 0 | 0 | 0 |
| 1734959482 | 23.7 deg C | 36.5 % | 0 | 0 | 0 |
| 1734958583 | 22.1 deg C | 37.8 % | 0 | 0 | 0 |
| 1734954449 | 25 deg C | 34.3 % | 0 | 0 | 0 |
| 1734953545 | 24.9 deg C | 34.1 % | 0 | 0 | 0 |
| 1734952645 | 25 deg C | 34 % | 0 | 0 | 0 |
| 1734951748 | 25 deg C | 34.1 % | 0 | 0 | 0 |
| 1734950844 | 25 deg C | 34.2 % | 0 | 0 | 0 |
| 1734949948 | 25.2 deg C | 34.4 % | 0 | 0 | 0 |
| 1734949052 | 25.4 deg C | 34.3 % | 0 | 0 | 0 |
| 1734948154 | 25.3 deg C | 34.4 % | 0 | 0 | 0 |
| 1734947251 | 25.2 deg C | 34.5 % | 0 | 0 | 0 |
| 1734946351 | 25.1 deg C | 34.9 % | 0 | 0 | 0 |
*Used Equation Coefficients:
Temp: 0, 0.1, 0
Humi: 0, 0.1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)