This is the latest recevied telemetry packets stored in our database for station/object NEWPRT. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Value1* | Value2* | Value3* | Value4* | Value5* |
---|---|---|---|---|---|
1716223832 | 0 | 0 | 90 | 125 | 131 |
1716222932 | 0 | 0 | 117 | 126 | 131 |
1716222031 | 0 | 0 | 93 | 125 | 131 |
1716221132 | 0 | 0 | 115 | 126 | 131 |
1716220231 | 0 | 0 | 92 | 126 | 131 |
1716219332 | 0 | 0 | 94 | 125 | 131 |
1716218432 | 0 | 0 | 88 | 125 | 131 |
1716217532 | 0 | 0 | 93 | 126 | 131 |
1716216631 | 0 | 0 | 94 | 125 | 131 |
1716215732 | 0 | 0 | 116 | 126 | 131 |
1716214831 | 0 | 0 | 114 | 126 | 131 |
1716213932 | 0 | 0 | 95 | 125 | 131 |
1716213031 | 0 | 0 | 127 | 125 | 131 |
1716212133 | 0 | 0 | 126 | 126 | 131 |
1716211231 | 0 | 0 | 94 | 125 | 131 |
1716210332 | 0 | 0 | 87 | 125 | 131 |
1716209431 | 0 | 0 | 92 | 124 | 131 |
1716208532 | 0 | 0 | 111 | 123 | 131 |
1716207631 | 0 | 0 | 86 | 123 | 131 |
1716206732 | 0 | 0 | 125 | 123 | 131 |
1716205831 | 0 | 0 | 90 | 123 | 131 |
1716204932 | 0 | 0 | 119 | 125 | 131 |
1716204031 | 0 | 0 | 126 | 125 | 131 |
1716203132 | 0 | 0 | 127 | 125 | 131 |
1716202231 | 0 | 0 | 87 | 125 | 131 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)