This is the latest recevied telemetry packets stored in our database for station/object KE7A-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 03/13/2025 5:50:59 PM+00:00 | 453 | 618 | 0 | 0 | 0 |
| 03/13/2025 5:48:59 PM+00:00 | 479 | 618 | 0 | 0 | 0 |
| 03/13/2025 5:47:54 PM+00:00 | 467 | 618 | 0 | 0 | 0 |
| 03/13/2025 5:47:25 PM+00:00 | 479 | 617 | 0 | 0 | 0 |
| 03/13/2025 5:45:15 PM+00:00 | 473 | 616 | 0 | 0 | 0 |
| 03/13/2025 5:43:11 PM+00:00 | 471 | 616 | 0 | 0 | 0 |
| 03/13/2025 5:40:28 PM+00:00 | 454 | 616 | 0 | 0 | 0 |
| 03/13/2025 5:40:23 PM+00:00 | 455 | 615 | 0 | 0 | 0 |
| 03/13/2025 5:39:10 PM+00:00 | 470 | 615 | 0 | 0 | 0 |
| 03/13/2025 5:35:19 PM+00:00 | 455 | 613 | 0 | 0 | 0 |
| 03/13/2025 5:34:28 PM+00:00 | 453 | 612 | 0 | 0 | 0 |
| 03/13/2025 5:30:25 PM+00:00 | 460 | 616 | 0 | 0 | 0 |
| 03/13/2025 5:30:08 PM+00:00 | 453 | 615 | 0 | 0 | 0 |
| 03/13/2025 5:29:55 PM+00:00 | 453 | 614 | 0 | 0 | 0 |
| 03/13/2025 5:29:44 PM+00:00 | 470 | 614 | 0 | 0 | 0 |
| 03/13/2025 5:28:41 PM+00:00 | 479 | 614 | 0 | 0 | 0 |
| 03/13/2025 5:26:41 PM+00:00 | 457 | 613 | 0 | 0 | 0 |
| 03/13/2025 5:25:19 PM+00:00 | 481 | 612 | 0 | 0 | 0 |
| 03/13/2025 5:23:50 PM+00:00 | 455 | 613 | 0 | 0 | 0 |
| 03/13/2025 5:21:18 PM+00:00 | 478 | 612 | 0 | 0 | 0 |
| 03/13/2025 5:20:14 PM+00:00 | 480 | 611 | 0 | 0 | 0 |
| 03/13/2025 5:18:53 PM+00:00 | 478 | 610 | 0 | 0 | 0 |
| 03/13/2025 5:17:08 PM+00:00 | 466 | 607 | 0 | 0 | 0 |
| 03/13/2025 5:17:04 PM+00:00 | 465 | 607 | 0 | 0 | 0 |
| 03/13/2025 5:16:04 PM+00:00 | 413 | 605 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)