RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

IZ1DME-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IZ1DME-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	RSSI*	VBAT*
1736792982	-85 dbm	2.58 V
1736791482	-85 dbm	2.6 V
1736789982	-83 dbm	2.62 V
1736788483	-87 dbm	2.64 V
1736786982	-88 dbm	2.67 V
1736785483	-89 dbm	2.69 V
1736783982	-88 dbm	2.73 V
1736782483	-92 dbm	2.86 V
1736780982	-89 dbm	2.86 V
1736779482	-91 dbm	2.86 V
1736777982	-93 dbm	2.86 V
1736762137	-86 dbm	2.82 V
1736760637	-92 dbm	2.73 V
1736759137	-93 dbm	2.21 V
1736757637	-88 dbm	2.21 V
1736756137	-92 dbm	2.21 V
1736735138	-90 dbm	2.32 V
1736733641	-91 dbm	2.33 V
1736732148	-91 dbm	2.35 V
1736730638	-91 dbm	2.34 V
1736729145	-91 dbm	2.35 V
1736727637	-91 dbm	2.37 V
1736726137	-91 dbm	2.38 V
1736724638	-93 dbm	2.4 V
1736723138	-92 dbm	2.41 V

*Used Equation Coefficients:

RSSI: 0, -1, 0

VBAT: 0, 0.01, 0

Value3: 0, 0, 0

Value4: 0, 0, 0

Value5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)