This is the latest recevied telemetry packets stored in our database for station/object DO7BTR-12. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp* | Humi* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1736524723 | 11 deg C | 54 % | 0 | 0 | 0 |
| 1736520218 | 19.5 deg C | 44.4 % | 0 | 0 | 0 |
| 1736518421 | 23.5 deg C | 40.6 % | 0 | 0 | 0 |
| 1736517519 | 22.8 deg C | 46.1 % | 0 | 0 | 0 |
| 1736516621 | 14 deg C | 51.5 % | 0 | 0 | 0 |
| 1736516584 | 13.9 deg C | 50.8 % | 0 | 0 | 0 |
| 1736514375 | 21.8 deg C | 43.5 % | 0 | 0 | 0 |
| 1736513874 | 23.2 deg C | 43.6 % | 0 | 0 | 0 |
| 1736512970 | 22.3 deg C | 45.6 % | 0 | 0 | 0 |
| 1736512074 | 19.2 deg C | 50.2 % | 0 | 0 | 0 |
| 1736511173 | 16.2 deg C | 53.5 % | 0 | 0 | 0 |
| 1736510272 | 14.5 deg C | 54.5 % | 0 | 0 | 0 |
| 1736509368 | 15.4 deg C | 52.8 % | 0 | 0 | 0 |
| 1736508470 | 15.7 deg C | 52.5 % | 0 | 0 | 0 |
| 1736507564 | 16.2 deg C | 50.8 % | 0 | 0 | 0 |
| 1736506668 | 18.1 deg C | 48.5 % | 0 | 0 | 0 |
| 1736505767 | 20 deg C | 46 % | 0 | 0 | 0 |
| 1736504865 | 22.3 deg C | 44 % | 0 | 0 | 0 |
| 1736503969 | 25 deg C | 43.8 % | 0 | 0 | 0 |
| 1736503065 | 24.5 deg C | 54.3 % | 0 | 0 | 0 |
| 1736502163 | 15 deg C | 74.8 % | 0 | 0 | 0 |
| 1736501260 | 4.5 deg C | 78.1 % | 0 | 0 | 0 |
*Used Equation Coefficients:
Temp: 0, 0.1, 0
Humi: 0, 0.1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)