This is the latest recevied telemetry packets stored in our database for station/object PANDO. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Value1* | Value2* | Value3* | Value4* | Value5* |
---|---|---|---|---|---|
1716221394 | 144 | 68 | 58 | 48 | 49 |
1716219591 | 144 | 23 | 85 | 42 | 74 |
1716217788 | 144 | 25 | 59 | 42 | 48 |
1716215988 | 135 | 26 | 60 | 42 | 48 |
1716214183 | 131 | 58 | 66 | 42 | 48 |
1716212379 | 126 | 25 | 68 | 69 | 49 |
1716210576 | 126 | 61 | 69 | 39 | 49 |
1716208773 | 126 | 22 | 69 | 42 | 48 |
1716206971 | 126 | 25 | 69 | 42 | 48 |
1716205168 | 126 | 22 | 70 | 41 | 48 |
1716203365 | 126 | 23 | 97 | 42 | 74 |
1716201564 | 126 | 25 | 96 | 42 | 74 |
1716199759 | 126 | 23 | 96 | 42 | 74 |
1716197957 | 126 | 22 | 69 | 42 | 48 |
1716196154 | 126 | 22 | 68 | 42 | 48 |
1716194351 | 127 | 24 | 68 | 42 | 48 |
1716192547 | 127 | 21 | 66 | 42 | 48 |
1716190743 | 127 | 28 | 68 | 66 | 49 |
1716188940 | 127 | 23 | 67 | 66 | 49 |
1716187138 | 127 | 20 | 67 | 42 | 48 |
1716185335 | 127 | 24 | 94 | 42 | 73 |
1716183532 | 128 | 24 | 66 | 42 | 48 |
1716181729 | 128 | 27 | 66 | 42 | 48 |
1716179926 | 128 | 24 | 66 | 42 | 48 |
1716178121 | 128 | 31 | 66 | 42 | 48 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)