This is the latest recevied telemetry packets stored in our database for station/object KC0OOO-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Sate* | Temp* | Volt* | Alt* | A5* |
|---|---|---|---|---|---|
| 1736446968 | 519 | 10.4 F | 0 V | 0 M | 0 |
| 1736446959 | 522 | 10.3 F | 0 V | 0 M | 0 |
| 1736446947 | 521 | 10.3 F | 0 V | 0 M | 0 |
| 1736446901 | 522 | 10.3 F | 0 V | 0 M | 0 |
| 1736446896 | 524 | 10.3 F | 0 V | 0 M | 0 |
| 1736446887 | 521 | 10.3 F | 0 V | 0 M | 0 |
| 1736446802 | 523 | 10.3 F | 0 V | 0 M | 0 |
| 1736446754 | 519 | 10.3 F | 0 V | 0 M | 0 |
| 1736446664 | 520 | 10.3 F | 0 V | 0 M | 0 |
| 1736446634 | 519 | 10.3 F | 0 V | 0 M | 0 |
| 1736446395 | 524 | 10.2 F | 0 V | 0 M | 0 |
| 1736446373 | 520 | 10.2 F | 0 V | 0 M | 0 |
| 1736446269 | 524 | 10.2 F | 0 V | 0 M | 0 |
| 1736445973 | 522 | 10 F | 0 V | 0 M | 0 |
| 1736445833 | 523 | 9.9 F | 0 V | 0 M | 0 |
| 1736445130 | 523 | 9.6 F | 0 V | 0 M | 0 |
| 1736441719 | 521 | 7.7 F | 0 V | 0 M | 0 |
| 1736440586 | 522 | 6.2 F | 0 V | 0 M | 0 |
| 1736440354 | 515 | 5.8 F | 0 V | 0 M | 0 |
| 1736440207 | 521 | 5.6 F | 0 V | 0 M | 0 |
| 1736440170 | 516 | 5.4 F | 0 V | 0 M | 0 |
| 1736440161 | 516 | 5.4 F | 0 V | 0 M | 0 |
| 1736440075 | 518 | 5.2 F | 0 V | 0 M | 0 |
| 1736440043 | 522 | 5.2 F | 0 V | 0 M | 0 |
| 1736439941 | 516 | 5 F | 0 V | 0 M | 0 |
*Used Equation Coefficients:
Sate: 0, 1, 0
Temp: 0, 0.1, -50
Volt: 0, 0.01, 0
Alt: 0, 10, 0
A5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)