RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

SADDLE Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SADDLE. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1736410775	14.18 Volt	770 Pkt	10 Pkt	64 Pcnt
1736410771	14.18 Volt	770 Pkt	10 Pkt	64 Pcnt
1736407173	14.18 Volt	790 Pkt	10 Pkt	68 Pcnt
1736407171	14.18 Volt	790 Pkt	10 Pkt	68 Pcnt
1736403572	14.18 Volt	740 Pkt	20 Pkt	69 Pcnt
1736403571	14.18 Volt	740 Pkt	20 Pkt	69 Pcnt
1736399972	14.18 Volt	840 Pkt	20 Pkt	71 Pcnt
1736399971	14.18 Volt	840 Pkt	20 Pkt	71 Pcnt
1736396373	14.18 Volt	890 Pkt	40 Pkt	66 Pcnt
1736396371	14.18 Volt	890 Pkt	40 Pkt	66 Pcnt
1736392772	14.18 Volt	910 Pkt	20 Pkt	71 Pcnt
1736392771	14.18 Volt	910 Pkt	20 Pkt	71 Pcnt
1736389172	14.18 Volt	920 Pkt	40 Pkt	70 Pcnt
1736389171	14.18 Volt	920 Pkt	40 Pkt	70 Pcnt
1736385572	14.18 Volt	860 Pkt	40 Pkt	64 Pcnt
1736385571	14.18 Volt	860 Pkt	40 Pkt	64 Pcnt
1736381973	14.18 Volt	940 Pkt	40 Pkt	69 Pcnt
1736381971	14.18 Volt	940 Pkt	40 Pkt	69 Pcnt
1736376441	14.18 Volt	860 Pkt	30 Pkt	68 Pcnt
1736376439	14.18 Volt	860 Pkt	30 Pkt	68 Pcnt
1736372841	14.18 Volt	770 Pkt	30 Pkt	60 Pcnt
1736372839	14.18 Volt	770 Pkt	30 Pkt	60 Pcnt
1736369244	14.18 Volt	790 Pkt	30 Pkt	66 Pcnt
1736369239	14.18 Volt	790 Pkt	30 Pkt	66 Pcnt
1736365639	14.18 Volt	910 Pkt	40 Pkt	63 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)