RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

BV8SI-11 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object BV8SI-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	CPUTemp*	RxPkts/10m*	RxPkts/1h*	RxPkts/24h*	DiGi*
1734985287	9 C	64 p	64 p	64 p	162177 p
1734984088	10 C	64 p	64 p	64 p	162170 p
1734982887	10 C	64 p	64 p	64 p	162163 p
1734981686	11 C	64 p	64 p	64 p	162156 p
1734980486	9 C	64 p	64 p	64 p	162149 p
1734979287	10 C	64 p	64 p	64 p	162142 p
1734976887	10 C	64 p	64 p	64 p	162126 p
1734975687	10 C	64 p	64 p	64 p	162119 p
1734974487	10 C	64 p	64 p	64 p	162110 p
1734973287	10 C	64 p	64 p	64 p	162104 p
1734970887	11 C	64 p	64 p	64 p	162089 p
1734969688	10 C	64 p	64 p	64 p	162083 p
1734968488	10 C	64 p	64 p	64 p	162077 p
1734967288	11 C	64 p	64 p	64 p	162068 p
1734966089	10 C	64 p	64 p	64 p	162061 p
1734964888	10 C	64 p	64 p	64 p	162053 p
1734963687	10 C	64 p	64 p	64 p	162048 p
1734962487	8 C	64 p	64 p	64 p	162041 p
1734961288	9 C	64 p	64 p	64 p	162031 p
1734960088	10 C	64 p	64 p	64 p	162025 p
1734958888	9 C	64 p	64 p	64 p	162018 p
1734957688	9 C	64 p	64 p	64 p	162007 p
1734956488	9 C	64 p	64 p	64 p	162000 p
1734955288	9 C	64 p	64 p	64 p	161994 p
1734954088	9 C	64 p	64 p	64 p	161986 p

*Used Equation Coefficients:

CPUTemp: 0, 1, 0

RxPkts/10m: 0, 1, 0

RxPkts/1h: 0, 1, 0

RxPkts/24h: 0, 1, 0

DiGi: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)