RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

KC5EVE-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object KC5EVE-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1734954290	15.3 Volt	250 Pkt	140 Pkt	68 Pcnt
1734954290	15.3 Volt	250 Pkt	140 Pkt	68 Pcnt
1734953990	15.3 Volt	250 Pkt	140 Pkt	65 Pcnt
1734953691	15.3 Volt	250 Pkt	150 Pkt	66 Pcnt
1734953690	15.3 Volt	250 Pkt	150 Pkt	66 Pcnt
1734953390	15.45 Volt	260 Pkt	140 Pkt	66 Pcnt
1734953090	15.38 Volt	250 Pkt	140 Pkt	65 Pcnt
1734953090	15.38 Volt	250 Pkt	140 Pkt	65 Pcnt
1734952790	15.45 Volt	250 Pkt	140 Pkt	64 Pcnt
1734952491	15.38 Volt	240 Pkt	140 Pkt	64 Pcnt
1734952490	15.38 Volt	240 Pkt	140 Pkt	64 Pcnt
1734952190	15.3 Volt	250 Pkt	140 Pkt	64 Pcnt
1734951891	15.3 Volt	240 Pkt	140 Pkt	64 Pcnt
1734951890	15.3 Volt	240 Pkt	140 Pkt	64 Pcnt
1734951590	15.38 Volt	250 Pkt	140 Pkt	63 Pcnt
1734951290	15.3 Volt	250 Pkt	140 Pkt	64 Pcnt
1734951290	15.3 Volt	250 Pkt	140 Pkt	64 Pcnt
1734950990	15.45 Volt	260 Pkt	140 Pkt	65 Pcnt
1734950691	15.23 Volt	250 Pkt	130 Pkt	64 Pcnt
1734950690	15.23 Volt	250 Pkt	130 Pkt	64 Pcnt
1734950390	15.38 Volt	250 Pkt	130 Pkt	63 Pcnt
1734950091	15.3 Volt	240 Pkt	130 Pkt	61 Pcnt
1734950090	15.3 Volt	240 Pkt	130 Pkt	61 Pcnt
1734949790	15.38 Volt	250 Pkt	130 Pkt	61 Pcnt
1734949491	15.45 Volt	260 Pkt	130 Pkt	61 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Temp: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)