This is the latest recevied telemetry packets stored in our database for station/object N7ZPY-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Value1* | Value2* | Value3* | Value4* | Value5* |
---|---|---|---|---|---|
1730404838 | 484 | 613 | 0 | 0 | 0 |
1730404800 | 483 | 612 | 0 | 0 | 0 |
1730404755 | 485 | 612 | 0 | 0 | 0 |
1730404744 | 483 | 612 | 0 | 0 | 0 |
1730404635 | 485 | 610 | 0 | 0 | 0 |
1730404554 | 494 | 609 | 0 | 0 | 0 |
1730404278 | 486 | 611 | 0 | 0 | 0 |
1730404188 | 487 | 610 | 0 | 0 | 0 |
1730404121 | 487 | 609 | 0 | 0 | 0 |
1730403974 | 486 | 606 | 0 | 0 | 0 |
1730403900 | 486 | 603 | 0 | 0 | 0 |
1730403849 | 488 | 602 | 0 | 0 | 0 |
1730403816 | 488 | 600 | 0 | 0 | 0 |
1730403805 | 485 | 600 | 0 | 0 | 0 |
1730403765 | 485 | 599 | 0 | 0 | 0 |
1730403744 | 488 | 599 | 0 | 0 | 0 |
1730402042 | 488 | 596 | 0 | 0 | 0 |
1730401996 | 488 | 595 | 0 | 0 | 0 |
1730401973 | 483 | 594 | 0 | 0 | 0 |
1730396763 | 492 | 595 | 0 | 0 | 0 |
1730396753 | 485 | 595 | 0 | 0 | 0 |
1730396739 | 484 | 595 | 0 | 0 | 0 |
1730396734 | 483 | 595 | 0 | 0 | 0 |
1730396593 | 490 | 593 | 0 | 0 | 0 |
1730396533 | 490 | 592 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)