This is the latest recevied telemetry packets stored in our database for station/object VU3XUS-13. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | RxTraffic* | TxTraffic* | RxDrop* | RSSI* | SUN* |
|---|---|---|---|---|---|
| 1737023806 | 0 Pkt | 0 Pkt | 0 Pkt | -79 dBm | 0 % |
| 1737022883 | 0 Pkt | 0 Pkt | 0 Pkt | -79 dBm | 0 % |
| 1737021960 | 0 Pkt | 0 Pkt | 0 Pkt | -78 dBm | 0 % |
| 1737021037 | 0 Pkt | 0 Pkt | 0 Pkt | -79 dBm | 0 % |
| 1737020114 | 0 Pkt | 0 Pkt | 0 Pkt | -81 dBm | 0 % |
| 1737019191 | 0 Pkt | 0 Pkt | 0 Pkt | -82 dBm | 0 % |
| 1737018268 | 0 Pkt | 0 Pkt | 0 Pkt | -79 dBm | 0 % |
| 1737017345 | 0 Pkt | 0 Pkt | 0 Pkt | -80 dBm | 0 % |
| 1737016423 | 0 Pkt | 0 Pkt | 0 Pkt | -79 dBm | 0 % |
| 1737015500 | 0 Pkt | 0 Pkt | 0 Pkt | -78 dBm | 0 % |
| 1737014577 | 0 Pkt | 0 Pkt | 0 Pkt | -79 dBm | 0 % |
| 1737013660 | 0 Pkt | 0 Pkt | 0 Pkt | -81 dBm | 0 % |
| 1737012731 | 0 Pkt | 0 Pkt | 0 Pkt | -80 dBm | 0 % |
| 1737011808 | 0 Pkt | 0 Pkt | 0 Pkt | -86 dBm | 0 % |
| 1737010885 | 0 Pkt | 0 Pkt | 0 Pkt | -81 dBm | 0 % |
| 1737009962 | 0 Pkt | 0 Pkt | 0 Pkt | -78 dBm | 0 % |
| 1737009039 | 0 Pkt | 0 Pkt | 0 Pkt | -79 dBm | 0 % |
| 1737008116 | 0 Pkt | 0 Pkt | 0 Pkt | -79 dBm | 0 % |
| 1737007193 | 0 Pkt | 0 Pkt | 0 Pkt | -81 dBm | 0 % |
| 1737006270 | 0 Pkt | 0 Pkt | 0 Pkt | -78 dBm | 0 % |
| 1737005347 | 0 Pkt | 0 Pkt | 0 Pkt | -80 dBm | 0 % |
| 1737004424 | 0 Pkt | 0 Pkt | 0 Pkt | -80 dBm | 0 % |
| 1737003502 | 0 Pkt | 0 Pkt | 0 Pkt | -78 dBm | 0 % |
| 1737002578 | 0 Pkt | 0 Pkt | 0 Pkt | -83 dBm | 0 % |
| 1737001655 | 0 Pkt | 0 Pkt | 0 Pkt | -78 dBm | 0 % |
*Used Equation Coefficients:
RxTraffic: 0, 1, 0
TxTraffic: 0, 1, 0
RxDrop: 0, 1, 0
RSSI: 0, -1, 0
SUN: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)