This is the latest recevied telemetry packets stored in our database for station/object WA4OPQ-6. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | BattCur* | BtVolt* | Power* | SolR* | BoxT* |
|---|---|---|---|---|---|
| 1736378600 | -470.8 mAmp | 11.7 Volt | 5.02 Watt | 0 W/m2 | 75.2 deg.F |
| 1736377707 | -431.6 mAmp | 11.71 Volt | 5.97 Watt | 0 W/m2 | 75.2 deg.F |
| 1736376847 | -451.2 mAmp | 11.73 Volt | 5.34 Watt | 0 W/m2 | 75.2 deg.F |
| 1736376044 | -431.6 mAmp | 11.76 Volt | 5.34 Watt | 0 W/m2 | 75.2 deg.F |
| 1736375303 | -451.2 mAmp | 11.77 Volt | 5.34 Watt | 0 W/m2 | 75.2 deg.F |
| 1736374532 | -392.4 mAmp | 11.82 Volt | 4.71 Watt | 0 W/m2 | 75.2 deg.F |
| 1736373752 | -412 mAmp | 11.84 Volt | 5.02 Watt | 0 W/m2 | 75.2 deg.F |
| 1736354245 | -451.2 mAmp | 11.48 Volt | 5.97 Watt | 0 W/m2 | 75.2 deg.F |
*Used Equation Coefficients:
BattCur: 0, 19.6, -1000
BtVolt: 0, 0.012, 11
Power: 0, 0.314, 0
SolR: 0, 3.92, 0
BoxT: 0, 0.47, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)