RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

HP2PCE-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HP2PCE-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1734989311	13.65 Volt	260 Pkt	130 Pkt	54 Pcnt
1734988590	13.65 Volt	260 Pkt	130 Pkt	53 Pcnt
1734987870	13.65 Volt	250 Pkt	120 Pkt	55 Pcnt
1734987149	13.65 Volt	250 Pkt	120 Pkt	58 Pcnt
1734986429	13.65 Volt	230 Pkt	110 Pkt	61 Pcnt
1734985708	13.65 Volt	250 Pkt	110 Pkt	62 Pcnt
1734984987	13.65 Volt	250 Pkt	110 Pkt	64 Pcnt
1734984266	13.65 Volt	240 Pkt	110 Pkt	65 Pcnt
1734983546	13.65 Volt	230 Pkt	110 Pkt	61 Pcnt
1734982104	13.65 Volt	220 Pkt	110 Pkt	60 Pcnt
1734981383	13.65 Volt	210 Pkt	100 Pkt	56 Pcnt
1734980663	13.65 Volt	220 Pkt	110 Pkt	53 Pcnt
1734979942	13.65 Volt	220 Pkt	110 Pkt	53 Pcnt
1734979221	13.65 Volt	220 Pkt	100 Pkt	53 Pcnt
1734978501	13.65 Volt	220 Pkt	100 Pkt	55 Pcnt
1734977780	13.65 Volt	230 Pkt	100 Pkt	57 Pcnt
1734977059	13.65 Volt	230 Pkt	100 Pkt	58 Pcnt
1734976339	13.65 Volt	230 Pkt	110 Pkt	59 Pcnt
1734975618	13.65 Volt	230 Pkt	110 Pkt	58 Pcnt
1734974897	13.58 Volt	230 Pkt	110 Pkt	57 Pcnt
1734974177	13.65 Volt	240 Pkt	120 Pkt	57 Pcnt
1734973456	13.65 Volt	230 Pkt	110 Pkt	59 Pcnt
1734972735	13.65 Volt	230 Pkt	110 Pkt	57 Pcnt
1734972018	13.65 Volt	240 Pkt	100 Pkt	60 Pcnt
1734971294	13.65 Volt	230 Pkt	100 Pkt	58 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)