RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

ON6YF-2 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object ON6YF-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1734925853	12.68 Volt	650 Pkt	280 Pkt	72 Pcnt
1734925553	12.68 Volt	640 Pkt	280 Pkt	72 Pcnt
1734925253	12.68 Volt	640 Pkt	280 Pkt	72 Pcnt
1734924953	12.68 Volt	610 Pkt	270 Pkt	72 Pcnt
1734924653	12.68 Volt	620 Pkt	280 Pkt	72 Pcnt
1734924353	12.68 Volt	610 Pkt	270 Pkt	72 Pcnt
1734924053	12.68 Volt	600 Pkt	270 Pkt	72 Pcnt
1734923753	12.68 Volt	590 Pkt	270 Pkt	71 Pcnt
1734923153	12.68 Volt	570 Pkt	260 Pkt	71 Pcnt
1734922853	12.68 Volt	610 Pkt	300 Pkt	70 Pcnt
1734922553	12.68 Volt	610 Pkt	300 Pkt	69 Pcnt
1734922253	12.68 Volt	610 Pkt	300 Pkt	69 Pcnt
1734921953	12.68 Volt	620 Pkt	300 Pkt	69 Pcnt
1734921653	12.68 Volt	630 Pkt	310 Pkt	69 Pcnt
1734921353	12.68 Volt	600 Pkt	290 Pkt	70 Pcnt
1734921053	12.68 Volt	620 Pkt	300 Pkt	70 Pcnt
1734920753	12.68 Volt	600 Pkt	300 Pkt	69 Pcnt
1734920453	12.68 Volt	600 Pkt	300 Pkt	70 Pcnt
1734920153	12.68 Volt	590 Pkt	290 Pkt	70 Pcnt
1734919853	12.68 Volt	590 Pkt	290 Pkt	70 Pcnt
1734919553	12.68 Volt	580 Pkt	290 Pkt	69 Pcnt
1734919253	12.68 Volt	550 Pkt	260 Pkt	76 Pcnt
1734918953	12.68 Volt	540 Pkt	260 Pkt	74 Pcnt
1734918653	12.68 Volt	540 Pkt	260 Pkt	74 Pcnt
1734918353	12.68 Volt	540 Pkt	260 Pkt	73 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)