RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

PP5CFL-2 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object PP5CFL-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RSSI*	VBAT*
1730424106	-70 dbm	2.94 V
1730423806	-70 dbm	2.94 V
1730423506	-72 dbm	2.94 V
1730423206	-71 dbm	2.94 V
1730422906	-71 dbm	2.94 V
1730422607	-74 dbm	2.94 V
1730422306	-71 dbm	2.94 V
1730422006	-71 dbm	2.94 V
1730421706	-72 dbm	2.94 V
1730421406	-73 dbm	2.94 V
1730421106	-70 dbm	2.94 V
1730420806	-71 dbm	2.94 V
1730420506	-73 dbm	2.94 V
1730420206	-73 dbm	2.94 V
1730419907	-74 dbm	2.94 V
1730419606	-72 dbm	2.94 V
1730419306	-72 dbm	2.94 V
1730419006	-71 dbm	2.94 V
1730418706	-69 dbm	2.94 V
1730418406	-70 dbm	2.94 V
1730418107	-70 dbm	2.94 V
1730417807	-70 dbm	2.94 V
1730417506	-70 dbm	2.94 V
1730417207	-69 dbm	2.94 V
1730416906	-68 dbm	2.94 V

*Used Equation Coefficients:

RSSI: 0, -1, 0

VBAT: 0, 0.01, 0

Value3: 0, 0, 0

Value4: 0, 0, 0

Value5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)