This is the latest recevied telemetry packets stored in our database for station/object BEAMONE. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp* | Humi* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1730420125 | 13.8 deg C | 82.6 % | 0 | 0 | 0 |
| 1730419225 | 13.8 deg C | 82.4 % | 0 | 0 | 0 |
| 1730418325 | 13.8 deg C | 82.1 % | 0 | 0 | 0 |
| 1730417425 | 13.8 deg C | 82 % | 0 | 0 | 0 |
| 1730416525 | 13.8 deg C | 81.8 % | 0 | 0 | 0 |
| 1730415625 | 13.8 deg C | 81.8 % | 0 | 0 | 0 |
| 1730414725 | 13.9 deg C | 81.5 % | 0 | 0 | 0 |
| 1730413825 | 13.8 deg C | 81.6 % | 0 | 0 | 0 |
| 1730412925 | 13.9 deg C | 81.3 % | 0 | 0 | 0 |
| 1730412025 | 13.9 deg C | 81.3 % | 0 | 0 | 0 |
| 1730411124 | 13.8 deg C | 81.4 % | 0 | 0 | 0 |
| 1730410224 | 13.8 deg C | 81.3 % | 0 | 0 | 0 |
| 1730409324 | 13.9 deg C | 81.1 % | 0 | 0 | 0 |
| 1730408424 | 13.9 deg C | 81.4 % | 0 | 0 | 0 |
| 1730407524 | 13.9 deg C | 81.3 % | 0 | 0 | 0 |
| 1730406624 | 13.9 deg C | 81.3 % | 0 | 0 | 0 |
| 1730405724 | 13.8 deg C | 81.3 % | 0 | 0 | 0 |
| 1730404823 | 13.9 deg C | 81.1 % | 0 | 0 | 0 |
| 1730403923 | 13.9 deg C | 80.9 % | 0 | 0 | 0 |
| 1730403023 | 13.9 deg C | 80.7 % | 0 | 0 | 0 |
| 1730402123 | 13.9 deg C | 80.8 % | 0 | 0 | 0 |
| 1730401223 | 14 deg C | 80.4 % | 0 | 0 | 0 |
| 1730400323 | 14 deg C | 80.3 % | 0 | 0 | 0 |
| 1730399423 | 14.1 deg C | 80.3 % | 0 | 0 | 0 |
| 1730398523 | 14 deg C | 80.3 % | 0 | 0 | 0 |
*Used Equation Coefficients:
Temp: 0, 0.1, 0
Humi: 0, 0.1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)