This is the latest recevied telemetry packets stored in our database for station/object OE1KDA-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | press* | temp.in* | hum* | eCO2* | temp.out* |
---|---|---|---|---|---|
1719613977 | 0 hPa | 0 C deg | 0 % | 1495 ppm | 0 C deg |
1719612777 | 0 hPa | 0 C deg | 0 % | 1491 ppm | 0 C deg |
1719611577 | 0 hPa | 0 C deg | 0 % | 1515 ppm | 0 C deg |
1719610376 | 0 hPa | 0 C deg | 0 % | 1356 ppm | 0 C deg |
1719609178 | 0 hPa | 0 C deg | 0 % | 1204 ppm | 0 C deg |
1719607976 | 0 hPa | 0 C deg | 0 % | 987 ppm | 0 C deg |
1719606776 | 0 hPa | 0 C deg | 0 % | 874 ppm | 0 C deg |
1719605578 | 0 hPa | 0 C deg | 0 % | 865 ppm | 0 C deg |
1719604376 | 0 hPa | 0 C deg | 0 % | 949 ppm | 0 C deg |
1719603176 | 0 hPa | 0 C deg | 0 % | 1181 ppm | 0 C deg |
1719601976 | 0 hPa | 0 C deg | 0 % | 1285 ppm | 0 C deg |
1719600776 | 0 hPa | 0 C deg | 0 % | 1571 ppm | 0 C deg |
1719599576 | 0 hPa | 0 C deg | 0 % | 1882 ppm | 0 C deg |
1719598376 | 0 hPa | 0 C deg | 0 % | 1890 ppm | 0 C deg |
1719597176 | 0 hPa | 0 C deg | 0 % | 1515 ppm | 0 C deg |
1719595977 | 0 hPa | 0 C deg | 0 % | 1441 ppm | 0 C deg |
1719594777 | 0 hPa | 0 C deg | 0 % | 1220 ppm | 0 C deg |
1719593575 | 0 hPa | 0 C deg | 0 % | 959 ppm | 0 C deg |
1719592376 | 0 hPa | 0 C deg | 0 % | 882 ppm | 0 C deg |
1719591177 | 0 hPa | 0 C deg | 0 % | 865 ppm | 0 C deg |
1719589975 | 0 hPa | 0 C deg | 0 % | 825 ppm | 0 C deg |
1719588780 | 0 hPa | 0 C deg | 0 % | 865 ppm | 0 C deg |
1719587575 | 0 hPa | 0 C deg | 0 % | 798 ppm | 0 C deg |
1719586376 | 0 hPa | 0 C deg | 0 % | 719 ppm | 0 C deg |
1719585176 | 0 hPa | 0 C deg | 0 % | 728 ppm | 0 C deg |
*Used Equation Coefficients:
press: 0, 1, 0
temp.in: 0, 1, 0
hum: 0, 1, 0
eCO2: 0, 1, 0
temp.out: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)