RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

IR2DF Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IR2DF. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Rx10m*	Rx1h*	DgR*	Eff1h*
1734916214	22 Pkt	90 Pkt	12.95 Pcnt	59 Pcnt
1734915914	21 Pkt	80 Pkt	12.96 Pcnt	57 Pcnt
1734915614	16 Pkt	80 Pkt	12.97 Pcnt	56 Pcnt
1734915314	18 Pkt	70 Pkt	12.98 Pcnt	57 Pcnt
1734915014	14 Pkt	60 Pkt	12.99 Pcnt	55 Pcnt
1734914714	15 Pkt	60 Pkt	12.99 Pcnt	56 Pcnt
1734914414	15 Pkt	60 Pkt	13 Pcnt	58 Pcnt
1734914114	10 Pkt	60 Pkt	13.01 Pcnt	54 Pcnt
1734913814	13 Pkt	60 Pkt	13.01 Pcnt	49 Pcnt
1734913514	15 Pkt	60 Pkt	13.02 Pcnt	49 Pcnt
1734913214	4 Pkt	60 Pkt	13.02 Pcnt	49 Pcnt
1734912914	4 Pkt	70 Pkt	13.03 Pcnt	52 Pcnt
1734912614	11 Pkt	80 Pkt	13.03 Pcnt	59 Pcnt
1734912314	9 Pkt	100 Pkt	13.03 Pcnt	61 Pcnt
1734912014	4 Pkt	100 Pkt	13.04 Pcnt	62 Pcnt
1734911714	5 Pkt	110 Pkt	13.04 Pcnt	64 Pcnt
1734911414	14 Pkt	110 Pkt	13.04 Pcnt	65 Pcnt
1734911114	19 Pkt	110 Pkt	13.04 Pcnt	68 Pcnt
1734910814	9 Pkt	100 Pkt	13.05 Pcnt	68 Pcnt
1734910514	8 Pkt	100 Pkt	13.06 Pcnt	74 Pcnt
1734910214	15 Pkt	100 Pkt	13.06 Pcnt	75 Pcnt
1734909914	26 Pkt	110 Pkt	13.07 Pcnt	79 Pcnt
1734909614	27 Pkt	100 Pkt	13.07 Pcnt	80 Pcnt
1734909314	32 Pkt	90 Pkt	13.09 Pcnt	78 Pcnt
1734909014	22 Pkt	70 Pkt	13.1 Pcnt	75 Pcnt

*Used Equation Coefficients:

Rx10m: 0, 1, 0

Rx1h: 0, 10, 0

Dg10m: 0, 1, 0

DgR: 0, 0.001, 0

Eff1h: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)