RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

2E0XLS-9 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object 2E0XLS-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Battery*	Temp*
1734902779	12.66 Volts	15.36 Deg.C
1734902599	12.69 Volts	15.85 Deg.C
1734902419	12.69 Volts	15.36 Deg.C
1734902058	12.69 Volts	15.36 Deg.C
1734901877	12.69 Volts	15.36 Deg.C
1734901698	12.69 Volts	15.36 Deg.C
1734901517	12.69 Volts	15.36 Deg.C
1734901337	12.69 Volts	15.85 Deg.C
1734901156	12.69 Volts	15.36 Deg.C
1734900977	12.69 Volts	15.85 Deg.C
1734900797	12.69 Volts	15.36 Deg.C
1734900617	12.69 Volts	15.85 Deg.C
1734900436	12.69 Volts	15.85 Deg.C
1734900256	12.69 Volts	15.85 Deg.C
1734900075	12.66 Volts	15.85 Deg.C
1734899894	12.66 Volts	15.85 Deg.C
1734899715	12.66 Volts	15.85 Deg.C
1734899537	12.66 Volts	15.85 Deg.C
1734899354	12.66 Volts	16.34 Deg.C
1734899173	12.66 Volts	15.85 Deg.C
1734898994	12.63 Volts	16.34 Deg.C
1734898087	14.59 Volts	16.83 Deg.C
1734898065	13.86 Volts	16.34 Deg.C
1734897944	12.72 Volts	16.34 Deg.C
1734897765	12.72 Volts	16.34 Deg.C

*Used Equation Coefficients:

Battery: 0, 0.0293, 0

Temp: 0, 0.489, -273.15

Value3: 0, 1, 0

Value4: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)