This is the latest recevied telemetry packets stored in our database for station/object VK7DG-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1734930266 | 255 | 96 | 68 | 65 | 60 |
| 1734929965 | 255 | 97 | 70 | 67 | 62 |
| 1734929664 | 255 | 101 | 74 | 70 | 66 |
| 1734929363 | 255 | 67 | 40 | 37 | 35 |
| 1734921646 | 255 | 100 | 73 | 69 | 65 |
| 1734921345 | 255 | 103 | 77 | 73 | 69 |
| 1734921044 | 255 | 70 | 43 | 40 | 38 |
| 1734909955 | 255 | 106 | 80 | 75 | 72 |
| 1734909655 | 255 | 70 | 44 | 40 | 39 |
| 1734907281 | 255 | 108 | 81 | 76 | 74 |
| 1734906979 | 255 | 68 | 41 | 37 | 35 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)