RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

E22ULT-5 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object E22ULT-5. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	RxTraffic*	RSSI*	Voltage*
1734917361	13 Pkt	31 dBm	14.81 V
1734915531	13 Pkt	31 dBm	15.54 V
1734913705	8 Pkt	31 dBm	14.81 V
1734911876	5 Pkt	31 dBm	14.81 V
1734910050	6 Pkt	31 dBm	14.81 V
1734908223	6 Pkt	31 dBm	14.87 V
1734906397	11 Pkt	31 dBm	14.87 V
1734904570	11 Pkt	31 dBm	14.89 V
1734902742	10 Pkt	31 dBm	14.91 V
1734900912	11 Pkt	31 dBm	14.87 V
1734899085	14 Pkt	31 dBm	14.89 V
1734897257	15 Pkt	31 dBm	14.81 V
1734895427	23 Pkt	31 dBm	14.85 V
1734893596	20 Pkt	31 dBm	14.87 V
1734891766	24 Pkt	31 dBm	14.93 V
1734889931	20 Pkt	31 dBm	15.11 V
1734888099	22 Pkt	31 dBm	15.46 V
1734886268	19 Pkt	31 dBm	15.44 V
1734884436	19 Pkt	31 dBm	15.5 V
1734882605	18 Pkt	31 dBm	15.5 V
1734880775	34 Pkt	31 dBm	15.5 V
1734878942	11 Pkt	31 dBm	15.52 V
1734877114	12 Pkt	31 dBm	15.52 V
1734875286	1 Pkt	31 dBm	15.52 V
1734873461	2 Pkt	31 dBm	15.52 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)