This is the latest recevied telemetry packets stored in our database for station/object KI5NYZ-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp* | Load* | FreeMem* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1734920674 | 55.84 | 0.03 | 400 | 0 | 0 |
| 1734920073 | 55.84 | 0.04 | 399 | 0 | 0 |
| 1734919473 | 56.38 | 0.1 | 404 | 0 | 0 |
| 1734918873 | 56.38 | 0.11 | 405 | 0 | 0 |
| 1734918273 | 55.84 | 0.09 | 407 | 0 | 0 |
| 1734917673 | 56.38 | 0.1 | 405 | 0 | 0 |
| 1734917073 | 55.84 | 0.07 | 406 | 0 | 0 |
| 1734916473 | 56.38 | 0.13 | 403 | 0 | 0 |
| 1734915873 | 56.92 | 0.06 | 405 | 0 | 0 |
| 1734915273 | 56.38 | 0.01 | 405 | 0 | 0 |
| 1734914673 | 55.84 | 0.05 | 405 | 0 | 0 |
| 1734914073 | 55.84 | 0.14 | 405 | 0 | 0 |
| 1734913473 | 55.84 | 0.12 | 411 | 0 | 0 |
| 1734912873 | 56.38 | 0.02 | 407 | 0 | 0 |
| 1734912272 | 56.38 | 0.06 | 407 | 0 | 0 |
| 1734911672 | 55.84 | 0.09 | 404 | 0 | 0 |
| 1734911072 | 56.38 | 0.11 | 405 | 0 | 0 |
| 1734910472 | 56.38 | 0.05 | 408 | 0 | 0 |
| 1734909872 | 56.38 | 0.02 | 407 | 0 | 0 |
| 1734909272 | 55.84 | 0.03 | 405 | 0 | 0 |
| 1734908672 | 56.38 | 0.16 | 406 | 0 | 0 |
| 1734908072 | 56.92 | 0.06 | 405 | 0 | 0 |
| 1734907472 | 55.84 | 0.04 | 402 | 0 | 0 |
| 1734906872 | 55.84 | 0.04 | 405 | 0 | 0 |
| 1734906272 | 56.38 | 0.12 | 405 | 0 | 0 |
*Used Equation Coefficients:
Temp: 0, 0.001, 0
Load: 0, 0.001, 0
FreeMem: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)