RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

TC3EC Telemetry

This is the latest recevied telemetry packets stored in our database for station/object TC3EC. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	TxTraffic*	RSSI*	Voltage*
1734970287	92 Pkt	-61 dBm	11.46 V
1734968460	104 Pkt	-62 dBm	11.46 V
1734966628	192 Pkt	-62 dBm	11.46 V
1734964257	10 Pkt	-60 dBm	11.48 V
1734962655	206 Pkt	-63 dBm	11.5 V
1734960818	234 Pkt	-62 dBm	11.48 V
1734958977	187 Pkt	-61 dBm	11.48 V
1734957143	176 Pkt	-58 dBm	11.46 V
1734955309	192 Pkt	-62 dBm	11.48 V
1734953476	164 Pkt	-64 dBm	11.48 V
1734951643	175 Pkt	-62 dBm	11.48 V
1734949810	123 Pkt	-63 dBm	11.48 V
1734947979	101 Pkt	-62 dBm	11.4 V
1734946149	4 Pkt	-64 dBm	11.38 V
1734945861	110 Pkt	-64 dBm	11.34 V
1734944032	123 Pkt	-53 dBm	11.5 V
1734942201	115 Pkt	-52 dBm	11.53 V
1734940370	127 Pkt	-54 dBm	11.5 V
1734938539	112 Pkt	-53 dBm	11.5 V
1734936709	3 Pkt	-51 dBm	11.48 V
1734929670	96 Pkt	-53 dBm	11.5 V
1734927839	90 Pkt	-53 dBm	11.5 V
1734926010	89 Pkt	-51 dBm	11.48 V
1734924181	85 Pkt	-52 dBm	11.5 V
1734922353	88 Pkt	-50 dBm	11.48 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)