RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

SR2SWR Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SR2SWR. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	CPU Temp*	CPU Usage*	Temp BOX*
1734922212	55 Deg.C	7 %	55 Deg.C
1734921606	55 Deg.C	4 %	55 Deg.C
1734921013	55 Deg.C	4 %	55 Deg.C
1734920406	55 Deg.C	4 %	55 Deg.C
1734919813	55 Deg.C	5 %	55 Deg.C
1734919206	55 Deg.C	5 %	55 Deg.C
1734918606	55 Deg.C	5 %	55 Deg.C
1734918012	55 Deg.C	4 %	55 Deg.C
1734917406	55 Deg.C	7 %	55 Deg.C
1734916812	55 Deg.C	4 %	55 Deg.C
1734916206	55 Deg.C	5 %	55 Deg.C
1734915613	55 Deg.C	4 %	55 Deg.C
1734915006	55 Deg.C	7 %	55 Deg.C
1734914406	55 Deg.C	4 %	55 Deg.C
1734913812	55 Deg.C	4 %	55 Deg.C
1734913206	55 Deg.C	5 %	55 Deg.C
1734912612	55 Deg.C	7 %	55 Deg.C
1734912006	56 Deg.C	5 %	56 Deg.C
1734911412	56 Deg.C	8 %	56 Deg.C
1734910806	55 Deg.C	5 %	55 Deg.C
1734910206	55 Deg.C	7 %	55 Deg.C
1734909612	55 Deg.C	6 %	55 Deg.C
1734909006	55 Deg.C	7 %	55 Deg.C
1734908412	56 Deg.C	40 %	56 Deg.C
1734907806	56 Deg.C	7 %	56 Deg.C

*Used Equation Coefficients:

CPU Temp: 0, 0.1, 0

CPU Usage: 0, 1, 0

Temp BOX: 0, 0.1, 0

Value4: 0, 0, 0

Value5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)