RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

TA3TX-12 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object TA3TX-12. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	RSSI*	Voltage*
1734955661	0 Pkt	-59 dBm	21 V
1734955278	0 Pkt	-58 dBm	21 V
1734954896	0 Pkt	-58 dBm	21 V
1734954513	0 Pkt	-59 dBm	21 V
1734954131	1 Pkt	-61 dBm	21 V
1734953748	1 Pkt	-61 dBm	21 V
1734953365	0 Pkt	-58 dBm	21 V
1734952983	0 Pkt	-62 dBm	21 V
1734952601	0 Pkt	-59 dBm	21 V
1734952219	0 Pkt	-61 dBm	21 V
1734951836	0 Pkt	-61 dBm	21 V
1734951454	0 Pkt	-59 dBm	21 V
1734951071	0 Pkt	-61 dBm	21 V
1734950689	0 Pkt	-61 dBm	21 V
1734950307	0 Pkt	-60 dBm	21 V
1734949925	0 Pkt	-61 dBm	21 V
1734949543	0 Pkt	-58 dBm	21 V
1734949160	0 Pkt	-62 dBm	21 V
1734948778	0 Pkt	-59 dBm	21 V
1734948396	0 Pkt	-56 dBm	21 V
1734948013	0 Pkt	-58 dBm	21 V
1734947631	0 Pkt	-57 dBm	21 V
1734947249	0 Pkt	-59 dBm	21 V
1734946867	0 Pkt	-58 dBm	21 V
1734946485	0 Pkt	-61 dBm	21 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)