This is the latest recevied telemetry packets stored in our database for station/object SP9UOB-15. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | RxTot* | RxDir* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1734903248 | 151 pkt/15m | 42 | 0 | 0 | 0 |
| 1734902348 | 167 pkt/15m | 51 | 0 | 0 | 0 |
| 1734901448 | 170 pkt/15m | 56 | 0 | 0 | 0 |
| 1734900548 | 143 pkt/15m | 46 | 0 | 0 | 0 |
| 1734899648 | 142 pkt/15m | 55 | 0 | 0 | 0 |
| 1734897848 | 162 pkt/15m | 57 | 0 | 0 | 0 |
| 1734896948 | 146 pkt/15m | 48 | 0 | 0 | 0 |
| 1734896048 | 174 pkt/15m | 59 | 0 | 0 | 0 |
| 1734895148 | 136 pkt/15m | 48 | 0 | 0 | 0 |
| 1734894248 | 169 pkt/15m | 53 | 0 | 0 | 0 |
| 1734893348 | 125 pkt/15m | 47 | 0 | 0 | 0 |
| 1734892448 | 194 pkt/15m | 52 | 0 | 0 | 0 |
| 1734891548 | 156 pkt/15m | 55 | 0 | 0 | 0 |
| 1734890648 | 169 pkt/15m | 49 | 0 | 0 | 0 |
| 1734889748 | 167 pkt/15m | 56 | 0 | 0 | 0 |
| 1734888848 | 112 pkt/15m | 49 | 0 | 0 | 0 |
| 1734887948 | 129 pkt/15m | 50 | 0 | 0 | 0 |
| 1734887048 | 148 pkt/15m | 52 | 0 | 0 | 0 |
| 1734886148 | 134 pkt/15m | 48 | 0 | 0 | 0 |
| 1734885248 | 133 pkt/15m | 44 | 0 | 0 | 0 |
| 1734884348 | 136 pkt/15m | 40 | 0 | 0 | 0 |
| 1734883448 | 127 pkt/15m | 47 | 0 | 0 | 0 |
| 1734882548 | 117 pkt/15m | 47 | 0 | 0 | 0 |
| 1734881648 | 135 pkt/15m | 49 | 0 | 0 | 0 |
| 1734880747 | 167 pkt/15m | 52 | 0 | 0 | 0 |
*Used Equation Coefficients:
RxTot: 0, 1, 0
RxDir: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)