This is the latest recevied telemetry packets stored in our database for station/object YO8CLN-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Vin* | T* | Eff1h* | RX* | TX* |
|---|---|---|---|---|---|
| 1734966741 | 1240 V | 1180 C | 79 Pcnt | 0 Pkt | 0 Pkt |
| 1734963739 | 1250 V | 1190 C | 80 Pcnt | 0 Pkt | 0 Pkt |
| 1734960737 | 1300 V | 1200 C | 80 Pcnt | 0 Pkt | 0 Pkt |
| 1734957735 | 1390 V | 1200 C | 84 Pcnt | 0 Pkt | 0 Pkt |
| 1734954731 | 1390 V | 1200 C | 81 Pcnt | 0 Pkt | 0 Pkt |
| 1734951728 | 1420 V | 1190 C | 82 Pcnt | 0 Pkt | 0 Pkt |
| 1734948725 | 1360 V | 1190 C | 83 Pcnt | 0 Pkt | 0 Pkt |
| 1734945722 | 1390 V | 1190 C | 81 Pcnt | 0 Pkt | 0 Pkt |
| 1734942720 | 1390 V | 1170 C | 76 Pcnt | 0 Pkt | 0 Pkt |
| 1734939717 | 1380 V | 1160 C | 76 Pcnt | 0 Pkt | 0 Pkt |
| 1734936714 | 1380 V | 1150 C | 68 Pcnt | 0 Pkt | 0 Pkt |
| 1734910427 | 990 V | 1130 C | 30 Pcnt | 0 Pkt | 0 Pkt |
| 1734906119 | 990 V | 1140 C | 50 Pcnt | 0 Pkt | 0 Pkt |
| 1734902172 | 990 V | 1150 C | 72 Pcnt | 0 Pkt | 0 Pkt |
| 1734895514 | 940 V | 1160 C | 83 Pcnt | 0 Pkt | 0 Pkt |
| 1734892188 | 980 V | 1170 C | 85 Pcnt | 0 Pkt | 0 Pkt |
| 1734891080 | 1120 V | 1170 C | 81 Pcnt | 0 Pkt | 0 Pkt |
| 1734890833 | 1120 V | 1170 C | 75 Pcnt | 0 Pkt | 0 Pkt |
| 1734890590 | 1120 V | 1170 C | 57 Pcnt | 0 Pkt | 0 Pkt |
| 1734890343 | 1120 V | 1180 C | 70 Pcnt | 0 Pkt | 0 Pkt |
| 1734890061 | 1130 V | 1180 C | 85 Pcnt | 0 Pkt | 0 Pkt |
| 1734889820 | 1120 V | 1180 C | 77 Pcnt | 0 Pkt | 0 Pkt |
| 1734886817 | 1140 V | 1190 C | 77 Pcnt | 0 Pkt | 0 Pkt |
| 1734883814 | 1230 V | 1200 C | 78 Pcnt | 0 Pkt | 0 Pkt |
*Used Equation Coefficients:
Vin: 0, 10, 0
T: 0, 10, 0
Eff1h: 0, 1, 0
RX: 0, 0, 0
TX: 0, 0, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)