This is the latest recevied telemetry packets stored in our database for station/object LY1LB-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Vin* | Rx1h* | Dg1h* | Eff1h* | A5* |
---|---|---|---|---|---|
1718229418 | 12.45 Volt | 10 Pkt | 10 Pkt | 51 Pcnt | 0 None |
1718229119 | 12.45 Volt | 10 Pkt | 10 Pkt | 56 Pcnt | 0 None |
1718229118 | 12.45 Volt | 10 Pkt | 10 Pkt | 56 Pcnt | 0 None |
1718228818 | 12.45 Volt | 10 Pkt | 10 Pkt | 46 Pcnt | 0 None |
1718228518 | 12.45 Volt | 10 Pkt | 10 Pkt | 46 Pcnt | 0 None |
1718228218 | 12.45 Volt | 10 Pkt | 10 Pkt | 48 Pcnt | 0 None |
1718227918 | 12.45 Volt | 10 Pkt | 10 Pkt | 44 Pcnt | 0 None |
1718227618 | 12.45 Volt | 10 Pkt | 10 Pkt | 41 Pcnt | 0 None |
1718227319 | 12.45 Volt | 10 Pkt | 10 Pkt | 41 Pcnt | 0 None |
1718227318 | 12.45 Volt | 10 Pkt | 10 Pkt | 41 Pcnt | 0 None |
1718227018 | 12.45 Volt | 10 Pkt | 0 Pkt | 34 Pcnt | 0 None |
1718226718 | 12.45 Volt | 10 Pkt | 0 Pkt | 34 Pcnt | 0 None |
1718226418 | 12.45 Volt | 0 Pkt | 0 Pkt | 26 Pcnt | 0 None |
1718226118 | 12.45 Volt | 0 Pkt | 0 Pkt | 21 Pcnt | 0 None |
1718225818 | 12.45 Volt | 0 Pkt | 0 Pkt | 19 Pcnt | 0 None |
1718225519 | 12.45 Volt | 0 Pkt | 0 Pkt | 20 Pcnt | 0 None |
1718225518 | 12.45 Volt | 0 Pkt | 0 Pkt | 20 Pcnt | 0 None |
1718225218 | 12.45 Volt | 10 Pkt | 0 Pkt | 19 Pcnt | 0 None |
1718224918 | 12.45 Volt | 10 Pkt | 0 Pkt | 20 Pcnt | 0 None |
1718224618 | 12.45 Volt | 10 Pkt | 0 Pkt | 19 Pcnt | 0 None |
1718224318 | 12.45 Volt | 10 Pkt | 0 Pkt | 21 Pcnt | 0 None |
1718224018 | 12.45 Volt | 0 Pkt | 0 Pkt | 20 Pcnt | 0 None |
1718223719 | 12.45 Volt | 0 Pkt | 0 Pkt | 21 Pcnt | 0 None |
1718223718 | 12.45 Volt | 0 Pkt | 0 Pkt | 21 Pcnt | 0 None |
1718223418 | 12.45 Volt | 0 Pkt | 0 Pkt | 12 Pcnt | 0 None |
*Used Equation Coefficients:
Vin: 0, 0.075, 0
Rx1h: 0, 10, 0
Dg1h: 0, 10, 0
Eff1h: 0, 1, 0
A5: 0, 0, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)