This is the latest recevied telemetry packets stored in our database for station/object SR6WXP. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Rx10min* | Tx10min* | Digi10min* | HostTx10m* | Tempre* |
|---|---|---|---|---|---|
| 1734937186 | 23 Pkt | 5 Pkt | 0 Pkt | 0 Pkt | 16 DegC |
| 1734936583 | 7 Pkt | 5 Pkt | 0 Pkt | 0 Pkt | 16 DegC |
| 1734929964 | 5 Pkt | 2 Pkt | 0 Pkt | 0 Pkt | 16.5 DegC |
| 1734929363 | 9 Pkt | 4 Pkt | 0 Pkt | 0 Pkt | 16.5 DegC |
| 1734928762 | 11 Pkt | 2 Pkt | 0 Pkt | 0 Pkt | 16.5 DegC |
| 1734928161 | 5 Pkt | 3 Pkt | 0 Pkt | 0 Pkt | 16.5 DegC |
| 1734927559 | 10 Pkt | 2 Pkt | 0 Pkt | 0 Pkt | 16.5 DegC |
| 1734926959 | 9 Pkt | 5 Pkt | 0 Pkt | 0 Pkt | 16.5 DegC |
| 1734926354 | 3 Pkt | 2 Pkt | 0 Pkt | 0 Pkt | 16.5 DegC |
| 1734925754 | 6 Pkt | 5 Pkt | 0 Pkt | 0 Pkt | 16.5 DegC |
| 1734925151 | 5 Pkt | 5 Pkt | 0 Pkt | 0 Pkt | 16.5 DegC |
| 1734924552 | 3 Pkt | 6 Pkt | 0 Pkt | 0 Pkt | 16.5 DegC |
| 1734923949 | 10 Pkt | 2 Pkt | 0 Pkt | 0 Pkt | 16.5 DegC |
| 1734922314 | 5 Pkt | 4 Pkt | 0 Pkt | 0 Pkt | 16.5 DegC |
| 1734921711 | 1 Pkt | 3 Pkt | 0 Pkt | 0 Pkt | 16.5 DegC |
| 1734921110 | 6 Pkt | 4 Pkt | 0 Pkt | 0 Pkt | 16.5 DegC |
| 1734920508 | 7 Pkt | 2 Pkt | 0 Pkt | 0 Pkt | 16.5 DegC |
| 1734919908 | 1 Pkt | 3 Pkt | 0 Pkt | 0 Pkt | 16.5 DegC |
| 1734919306 | 4 Pkt | 2 Pkt | 0 Pkt | 0 Pkt | 16.5 DegC |
| 1734918706 | 4 Pkt | 5 Pkt | 0 Pkt | 0 Pkt | 16.5 DegC |
| 1734918101 | 3 Pkt | 2 Pkt | 0 Pkt | 0 Pkt | 16.5 DegC |
| 1734917501 | 5 Pkt | 5 Pkt | 0 Pkt | 0 Pkt | 16.5 DegC |
| 1734916898 | 10 Pkt | 5 Pkt | 0 Pkt | 0 Pkt | 16.5 DegC |
| 1734916299 | 3 Pkt | 6 Pkt | 0 Pkt | 0 Pkt | 16.5 DegC |
| 1734915697 | 7 Pkt | 2 Pkt | 0 Pkt | 0 Pkt | 16.5 DegC |
*Used Equation Coefficients:
Rx10min: 0, 1, 0
Tx10min: 0, 1, 0
Digi10min: 0, 1, 0
HostTx10m: 0, 1, 0
Tempre: 0, 0.5, -50
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)