This is the latest recevied telemetry packets stored in our database for station/object NJ7J-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Value1* | Value2* | Value3* | Value4* | Value5* |
---|---|---|---|---|---|
01/14/2025 6:01:19 AM+00:00 | 132 | 44 | 535 | 473 | 419 |
01/14/2025 5:51:18 AM+00:00 | 132 | 44 | 535 | 473 | 421 |
01/14/2025 5:41:17 AM+00:00 | 132 | 43 | 534 | 473 | 420 |
01/14/2025 5:31:16 AM+00:00 | 133 | 43 | 534 | 473 | 421 |
01/14/2025 5:21:14 AM+00:00 | 132 | 42 | 535 | 474 | 421 |
01/14/2025 5:11:13 AM+00:00 | 131 | 44 | 535 | 473 | 422 |
01/14/2025 5:01:12 AM+00:00 | 133 | 43 | 535 | 475 | 421 |
01/14/2025 4:51:11 AM+00:00 | 133 | 44 | 537 | 473 | 420 |
01/14/2025 4:41:09 AM+00:00 | 133 | 44 | 536 | 475 | 421 |
01/14/2025 4:31:08 AM+00:00 | 133 | 44 | 537 | 473 | 421 |
01/14/2025 4:21:07 AM+00:00 | 131 | 45 | 538 | 474 | 421 |
01/14/2025 4:11:06 AM+00:00 | 133 | 45 | 538 | 474 | 419 |
01/14/2025 4:01:05 AM+00:00 | 134 | 46 | 538 | 474 | 419 |
01/14/2025 3:51:04 AM+00:00 | 134 | 47 | 539 | 475 | 417 |
01/14/2025 3:41:03 AM+00:00 | 134 | 47 | 540 | 469 | 415 |
01/14/2025 3:31:02 AM+00:00 | 132 | 48 | 540 | 475 | 417 |
01/14/2025 3:21:01 AM+00:00 | 134 | 48 | 541 | 475 | 416 |
01/14/2025 3:11:00 AM+00:00 | 134 | 48 | 541 | 475 | 416 |
01/14/2025 3:00:59 AM+00:00 | 134 | 49 | 542 | 476 | 416 |
01/14/2025 2:50:58 AM+00:00 | 132 | 50 | 542 | 469 | 413 |
01/14/2025 2:40:57 AM+00:00 | 134 | 50 | 542 | 475 | 415 |
01/14/2025 2:30:56 AM+00:00 | 135 | 50 | 543 | 476 | 415 |
01/14/2025 2:20:55 AM+00:00 | 135 | 51 | 542 | 477 | 414 |
01/14/2025 2:10:54 AM+00:00 | 136 | 51 | 542 | 477 | 413 |
01/14/2025 2:00:51 AM+00:00 | 136 | 52 | 543 | 477 | 414 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)