RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

YM3KD-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object YM3KD-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	TxTraffic*	RxDrop*	RSSI*	Voltage*
1734918744	3 Pkt	32 Pkt	1 Pkt	-18 dBm	13.56 V
1734917781	6 Pkt	33 Pkt	2 Pkt	-18 dBm	13.56 V
1734916818	5 Pkt	31 Pkt	1 Pkt	-19 dBm	13.56 V
1734916818	5 Pkt	31 Pkt	1 Pkt	-18 dBm	13.56 V
1734915855	6 Pkt	32 Pkt	0 Pkt	-18 dBm	13.56 V
1734914895	2 Pkt	38 Pkt	0 Pkt	-18 dBm	13.56 V
1734913924	7 Pkt	36 Pkt	1 Pkt	-18 dBm	13.56 V
1734912956	4 Pkt	33 Pkt	0 Pkt	-18 dBm	13.56 V
1734911992	9 Pkt	40 Pkt	0 Pkt	-18 dBm	13.56 V
1734911019	10 Pkt	31 Pkt	0 Pkt	-18 dBm	13.56 V
1734911019	10 Pkt	31 Pkt	0 Pkt	-20 dBm	13.56 V
1734910059	3 Pkt	36 Pkt	2 Pkt	-18 dBm	13.56 V
1734909092	7 Pkt	46 Pkt	1 Pkt	-18 dBm	13.56 V
1734908111	7 Pkt	54 Pkt	0 Pkt	-19 dBm	13.56 V
1734907120	5 Pkt	51 Pkt	2 Pkt	-18 dBm	13.56 V
1734906134	6 Pkt	50 Pkt	2 Pkt	-18 dBm	13.56 V
1734905149	8 Pkt	52 Pkt	1 Pkt	-18 dBm	13.56 V
1734904160	6 Pkt	58 Pkt	0 Pkt	-18 dBm	13.56 V
1734903162	6 Pkt	57 Pkt	0 Pkt	-18 dBm	13.56 V
1734902166	8 Pkt	52 Pkt	1 Pkt	-18 dBm	13.56 V
1734901177	6 Pkt	43 Pkt	0 Pkt	-18 dBm	13.56 V
1734900199	3 Pkt	38 Pkt	0 Pkt	-18 dBm	13.56 V
1734899225	1 Pkt	50 Pkt	0 Pkt	-18 dBm	13.56 V
1734897251	6 Pkt	50 Pkt	1 Pkt	-18 dBm	13.56 V
1734896263	7 Pkt	48 Pkt	1 Pkt	-17 dBm	13.56 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)