RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

LW3HBV-6 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object LW3HBV-6. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

Time	RxTraffic*	TxTraffic*	RSSI*	Voltage*
1736374170	0 Pkt	0 Pkt	-15 dBm	12.2 V
1736368208	8 Pkt	0 Pkt	-13 dBm	12.14 V
1736362245	0 Pkt	0 Pkt	-11 dBm	12.12 V
1736356285	0 Pkt	0 Pkt	-13 dBm	12.18 V
1736350321	0 Pkt	0 Pkt	-12 dBm	12.18 V
1736344359	6 Pkt	0 Pkt	-12 dBm	12.18 V
1736338396	0 Pkt	0 Pkt	-12 dBm	12.18 V
1736332434	0 Pkt	0 Pkt	-10 dBm	12.12 V
1736326472	0 Pkt	0 Pkt	-9 dBm	12.14 V
1736320510	0 Pkt	0 Pkt	-11 dBm	12.2 V
1736314548	0 Pkt	0 Pkt	-11 dBm	12.12 V
1736308514	0 Pkt	0 Pkt	-11 dBm	12.12 V
1736302552	0 Pkt	0 Pkt	-11 dBm	12.2 V
1736296590	0 Pkt	1 Pkt	-11 dBm	12.18 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)