This is the latest recevied telemetry packets stored in our database for station/object W6BSD-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Temp* | Load* | FreeMem* | Value4* | Value5* |
---|---|---|---|---|---|
1719817844 | 34.17 | 0.14 | 84 | 0 | 0 |
1719817244 | 34.7 | 0.25 | 85 | 0 | 0 |
1719816643 | 34.17 | 0.38 | 84 | 0 | 0 |
1719816043 | 34.7 | 0.17 | 84 | 0 | 0 |
1719815443 | 34.7 | 0.2 | 85 | 0 | 0 |
1719814843 | 34.7 | 0.21 | 85 | 0 | 0 |
1719814243 | 34.7 | 0.25 | 85 | 0 | 0 |
1719813643 | 34.7 | 0.18 | 86 | 0 | 0 |
1719813043 | 34.7 | 0.14 | 86 | 0 | 0 |
1719812443 | 34.7 | 0.16 | 86 | 0 | 0 |
1719811843 | 34.7 | 0.2 | 87 | 0 | 0 |
1719811242 | 35.78 | 0.21 | 87 | 0 | 0 |
1719810642 | 34.7 | 0.19 | 87 | 0 | 0 |
1719810042 | 34.7 | 0.24 | 88 | 0 | 0 |
1719809442 | 34.7 | 0.24 | 88 | 0 | 0 |
1719808842 | 35.78 | 0.31 | 89 | 0 | 0 |
1719808242 | 35.24 | 0.19 | 89 | 0 | 0 |
1719807642 | 35.78 | 0.23 | 89 | 0 | 0 |
1719807042 | 35.78 | 0.2 | 85 | 0 | 0 |
1719806441 | 35.78 | 0.26 | 85 | 0 | 0 |
1719805841 | 36.32 | 0.26 | 85 | 0 | 0 |
1719805241 | 36.86 | 0.75 | 86 | 0 | 0 |
1719804641 | 37.93 | 1.33 | 86 | 0 | 0 |
1719804041 | 37.93 | 0.31 | 90 | 0 | 0 |
1719803441 | 36.86 | 0.23 | 92 | 0 | 0 |
*Used Equation Coefficients:
Temp: 0, 0.001, 0
Load: 0, 0.001, 0
FreeMem: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)