This is the latest recevied telemetry packets stored in our database for station/object OZ1ANE-12. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1734968471 | 472 | 605 | 0 | 0 | 0 |
| 1734968349 | 477 | 605 | 0 | 0 | 0 |
| 1734968334 | 476 | 605 | 0 | 0 | 0 |
| 1734968202 | 476 | 603 | 0 | 0 | 0 |
| 1734968073 | 479 | 603 | 0 | 0 | 0 |
| 1734968058 | 478 | 602 | 0 | 0 | 0 |
| 1734967997 | 478 | 601 | 0 | 0 | 0 |
| 1734967878 | 477 | 601 | 0 | 0 | 0 |
| 1734967624 | 478 | 599 | 0 | 0 | 0 |
| 1734967568 | 478 | 599 | 0 | 0 | 0 |
| 1734967521 | 478 | 598 | 0 | 0 | 0 |
| 1734967372 | 478 | 597 | 0 | 0 | 0 |
| 1734967371 | 478 | 597 | 0 | 0 | 0 |
| 1734967322 | 478 | 597 | 0 | 0 | 0 |
| 1734967244 | 477 | 597 | 0 | 0 | 0 |
| 1734967192 | 476 | 596 | 0 | 0 | 0 |
| 1734967138 | 476 | 595 | 0 | 0 | 0 |
| 1734967061 | 480 | 594 | 0 | 0 | 0 |
| 1734967006 | 479 | 594 | 0 | 0 | 0 |
| 1734966892 | 473 | 594 | 0 | 0 | 0 |
| 1734966793 | 470 | 590 | 0 | 0 | 0 |
| 1734966768 | 468 | 589 | 0 | 0 | 0 |
| 1734966720 | 471 | 588 | 0 | 0 | 0 |
| 1734966608 | 470 | 584 | 0 | 0 | 0 |
| 1734966570 | 474 | 581 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)