RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

IK6FUE-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IK6FUE-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	T Ambi*
1734973208	12.45 Volt	2.4 °C
1734972909	12.45 Volt	2.4 °C
1734972908	12.45 Volt	2.4 °C
1734972608	12.45 Volt	2.4 °C
1734972309	12.45 Volt	2.4 °C
1734972308	12.45 Volt	2.4 °C
1734972008	12.45 Volt	2.4 °C
1734971709	12.45 Volt	2.4 °C
1734971708	12.45 Volt	2.4 °C
1734971408	12.45 Volt	2.4 °C
1734971109	12.45 Volt	2.4 °C
1734971108	12.45 Volt	2.4 °C
1734970808	12.45 Volt	2.4 °C
1734970508	12.45 Volt	2.4 °C
1734970208	12.45 Volt	2.4 °C
1734969908	12.38 Volt	2.4 °C
1734969608	12.45 Volt	2.4 °C
1734969309	12.45 Volt	2.4 °C
1734969308	12.45 Volt	2.4 °C
1734969008	12.45 Volt	2.4 °C
1734968709	12.45 Volt	2.4 °C
1734968708	12.45 Volt	2.4 °C
1734968408	12.45 Volt	2.4 °C
1734968109	12.45 Volt	2.4 °C
1734968108	12.45 Volt	2.4 °C

*Used Equation Coefficients:

Vin: 0, 0.075, 0

V Pane: 0, 0.075, 0

A Pane: 0, 0.1953, -24.9984

T Ambi: 0, 0.9, -129

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)