This is the latest recevied telemetry packets stored in our database for station/object WALDEN. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 03/14/2025 8:33:06 PM+00:00 | 126 | 55 | 78 | 41 | 48 |
| 03/14/2025 8:23:08 PM+00:00 | 126 | 57 | 75 | 41 | 48 |
| 03/14/2025 7:53:15 PM+00:00 | 127 | 55 | 122 | 42 | 48 |
| 03/14/2025 7:51:38 PM+00:00 | 128 | 55 | 77 | 41 | 48 |
| 03/14/2025 7:41:43 PM+00:00 | 127 | 53 | 74 | 41 | 48 |
| 03/14/2025 7:41:33 PM+00:00 | 127 | 54 | 74 | 41 | 48 |
| 03/14/2025 7:13:21 PM+00:00 | 126 | 70 | 75 | 44 | 48 |
| 03/14/2025 6:43:35 PM+00:00 | 123 | 56 | 77 | 41 | 48 |
| 03/14/2025 6:33:41 PM+00:00 | 123 | 55 | 81 | 41 | 48 |
| 03/14/2025 6:13:55 PM+00:00 | 124 | 55 | 79 | 41 | 48 |
| 03/14/2025 5:34:13 PM+00:00 | 124 | 55 | 79 | 40 | 48 |
| 03/14/2025 5:24:14 PM+00:00 | 124 | 56 | 80 | 41 | 48 |
| 03/14/2025 5:14:18 PM+00:00 | 123 | 55 | 77 | 41 | 48 |
| 03/14/2025 4:34:27 PM+00:00 | 124 | 55 | 79 | 41 | 48 |
| 03/14/2025 4:24:33 PM+00:00 | 123 | 55 | 77 | 41 | 48 |
| 03/14/2025 4:14:30 PM+00:00 | 123 | 56 | 86 | 41 | 48 |
| 03/14/2025 4:04:30 PM+00:00 | 123 | 56 | 80 | 41 | 48 |
| 03/14/2025 3:54:33 PM+00:00 | 123 | 55 | 81 | 41 | 48 |
| 03/14/2025 3:44:41 PM+00:00 | 123 | 56 | 77 | 41 | 48 |
| 03/14/2025 3:34:49 PM+00:00 | 123 | 59 | 77 | 41 | 48 |
| 03/14/2025 3:24:47 PM+00:00 | 123 | 63 | 79 | 41 | 48 |
| 03/14/2025 3:14:50 PM+00:00 | 123 | 75 | 79 | 68 | 48 |
| 03/14/2025 2:55:02 PM+00:00 | 111 | 41 | 50 | 42 | 48 |
| 03/14/2025 2:45:08 PM+00:00 | 123 | 56 | 76 | 41 | 48 |
| 03/14/2025 2:35:08 PM+00:00 | 123 | 59 | 77 | 41 | 48 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)