RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

W7DOA Telemetry

This is the latest recevied telemetry packets stored in our database for station/object W7DOA. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1734969728	12.38 Volt	110 Pkt	100 Pkt	90 Pcnt
1734969727	12.38 Volt	110 Pkt	100 Pkt	90 Pcnt
1734969427	12.38 Volt	110 Pkt	90 Pkt	89 Pcnt
1734969129	12.38 Volt	110 Pkt	90 Pkt	90 Pcnt
1734969127	12.38 Volt	110 Pkt	90 Pkt	90 Pcnt
1734968827	12.38 Volt	110 Pkt	80 Pkt	90 Pcnt
1734968528	12.38 Volt	110 Pkt	80 Pkt	91 Pcnt
1734968527	12.38 Volt	110 Pkt	80 Pkt	91 Pcnt
1734968227	12.38 Volt	100 Pkt	80 Pkt	91 Pcnt
1734967927	12.38 Volt	100 Pkt	80 Pkt	92 Pcnt
1734967627	12.38 Volt	100 Pkt	80 Pkt	90 Pcnt
1734967328	12.38 Volt	100 Pkt	70 Pkt	90 Pcnt
1734967327	12.38 Volt	100 Pkt	70 Pkt	90 Pcnt
1734967027	12.38 Volt	100 Pkt	80 Pkt	90 Pcnt
1734966727	12.38 Volt	100 Pkt	80 Pkt	91 Pcnt
1734966427	12.38 Volt	100 Pkt	80 Pkt	91 Pcnt
1734966129	12.38 Volt	100 Pkt	80 Pkt	93 Pcnt
1734966127	12.38 Volt	100 Pkt	80 Pkt	93 Pcnt
1734965827	12.38 Volt	120 Pkt	90 Pkt	92 Pcnt
1734965529	12.38 Volt	110 Pkt	90 Pkt	92 Pcnt
1734965527	12.38 Volt	110 Pkt	90 Pkt	92 Pcnt
1734965227	12.38 Volt	120 Pkt	100 Pkt	91 Pcnt
1734964929	12.38 Volt	120 Pkt	100 Pkt	91 Pcnt
1734964927	12.38 Volt	120 Pkt	100 Pkt	91 Pcnt
1734964627	12.38 Volt	120 Pkt	100 Pkt	90 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)