RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

IR1ZXE-11 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IR1ZXE-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1734909999	14.01 Volt	100 Pkt	10 Pkt	77 Pcnt
1734908197	14.01 Volt	80 Pkt	10 Pkt	77 Pcnt
1734906396	14.01 Volt	70 Pkt	10 Pkt	73 Pcnt
1734904594	14.01 Volt	80 Pkt	0 Pkt	84 Pcnt
1734902792	14.01 Volt	80 Pkt	0 Pkt	90 Pcnt
1734900990	14.01 Volt	70 Pkt	0 Pkt	80 Pcnt
1734899189	14.01 Volt	60 Pkt	0 Pkt	76 Pcnt
1734897387	14.01 Volt	70 Pkt	0 Pkt	76 Pcnt
1734895585	14.01 Volt	60 Pkt	0 Pkt	74 Pcnt
1734893783	14.01 Volt	40 Pkt	0 Pkt	73 Pcnt
1734891982	14.01 Volt	30 Pkt	0 Pkt	82 Pcnt
1734890180	14.01 Volt	40 Pkt	0 Pkt	77 Pcnt
1734888378	14.01 Volt	50 Pkt	10 Pkt	72 Pcnt
1734886577	14.01 Volt	40 Pkt	10 Pkt	80 Pcnt
1734884775	14.01 Volt	50 Pkt	0 Pkt	75 Pcnt
1734882973	14.01 Volt	60 Pkt	0 Pkt	76 Pcnt
1734881171	14.01 Volt	50 Pkt	10 Pkt	86 Pcnt
1734879370	14.01 Volt	40 Pkt	0 Pkt	84 Pcnt
1734877568	14.01 Volt	40 Pkt	0 Pkt	79 Pcnt
1734875766	14.01 Volt	40 Pkt	0 Pkt	82 Pcnt
1734873964	14.01 Volt	50 Pkt	0 Pkt	89 Pcnt
1734872163	14.01 Volt	50 Pkt	0 Pkt	88 Pcnt
1734870361	14.01 Volt	50 Pkt	0 Pkt	78 Pcnt
1734868559	14.01 Volt	50 Pkt	0 Pkt	77 Pcnt
1734866757	14.01 Volt	50 Pkt	0 Pkt	84 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.077, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)