RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

SK3JR-4 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SK3JR-4. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	Vin*	Bat*	Wind*	Temp*
1736386301	13.8 Volt	13.5 Volt	0.6 m/s	-10.5 C
1736385102	13.8 Volt	13.5 Volt	0.6 m/s	-10.5 C
1736383902	13.8 Volt	13.5 Volt	0.9 m/s	-10.5 C
1736382702	13.8 Volt	13.5 Volt	0.6 m/s	-10.5 C
1736381502	13.8 Volt	13.5 Volt	0.6 m/s	-11 C
1736380302	13.8 Volt	13.5 Volt	0.9 m/s	-11 C
1736379102	13.8 Volt	13.5 Volt	0.9 m/s	-11 C
1736377902	13.8 Volt	13.5 Volt	0.6 m/s	-11 C
1736376702	13.8 Volt	13.5 Volt	0.6 m/s	-11 C
1736375502	13.8 Volt	13.5 Volt	1.2 m/s	-11 C
1736374302	13.8 Volt	13.5 Volt	0.6 m/s	-11 C
1736373102	13.8 Volt	13.5 Volt	0.9 m/s	-11 C
1736371902	13.8 Volt	13.5 Volt	0.6 m/s	-10.5 C
1736370702	13.8 Volt	13.5 Volt	0.9 m/s	-10.5 C
1736369502	13.8 Volt	13.5 Volt	0.9 m/s	-10.5 C
1736368302	13.8 Volt	13.5 Volt	0.6 m/s	-10.5 C
1736367102	13.8 Volt	13.5 Volt	0.6 m/s	-10.5 C
1736365902	13.8 Volt	13.5 Volt	0.9 m/s	-10.5 C
1736364703	13.8 Volt	13.5 Volt	0.6 m/s	-10.5 C
1736363503	13.8 Volt	13.5 Volt	0.9 m/s	-10.5 C
1736362303	13.8 Volt	13.5 Volt	0.6 m/s	-10.5 C
1736361103	13.8 Volt	13.5 Volt	0.6 m/s	-10.5 C
1736359903	13.8 Volt	13.5 Volt	0.6 m/s	-10.5 C
1736358703	13.8 Volt	13.5 Volt	0.6 m/s	-10.5 C
1736357503	13.8 Volt	13.5 Volt	0.6 m/s	-10.5 C

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Bat: 0, 0.1, 0

Wind: 0, 0.3, 0

Chg: 0, 0.1953, -24.8031

Temp: 0, 0.5, -64

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)