This is the latest recevied telemetry packets stored in our database for station/object PY5AX-15. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp* | U.Rel.* | UpTime* | Pkts* | VCC* |
|---|---|---|---|---|---|
| 1735065061 | 27 *C | 64 % | 257 hours | 4 pkts | 6.7 volts |
| 1735064145 | 27 *C | 64 % | 257 hours | 3 pkts | 6.7 volts |
| 1735062313 | 27 *C | 65 % | 257 hours | 4 pkts | 6.8 volts |
| 1735060480 | 27 *C | 65 % | 257 hours | 4 pkts | 6.8 volts |
| 1735059564 | 27 *C | 65 % | 257 hours | 3 pkts | 6.8 volts |
| 1735058648 | 26 *C | 65 % | 257 hours | 4 pkts | 6.8 volts |
| 1735057731 | 26 *C | 65 % | 257 hours | 3 pkts | 6.8 volts |
| 1735055898 | 26 *C | 64 % | 257 hours | 3 pkts | 6.8 volts |
| 1735054063 | 26 *C | 62 % | 257 hours | 3 pkts | 6.8 volts |
| 1735053148 | 26 *C | 65 % | 256 hours | 4 pkts | 6.8 volts |
| 1735052231 | 25 *C | 64 % | 256 hours | 3 pkts | 6.9 volts |
| 1735051314 | 25 *C | 64 % | 256 hours | 4 pkts | 6.9 volts |
| 1735049481 | 25 *C | 63 % | 256 hours | 4 pkts | 6.9 volts |
| 1735048565 | 26 *C | 64 % | 256 hours | 3 pkts | 6.9 volts |
| 1735047649 | 26 *C | 60 % | 256 hours | 4 pkts | 6.9 volts |
| 1735046733 | 27 *C | 59 % | 256 hours | 4 pkts | 6.8 volts |
| 1735044893 | 24 *C | 68 % | 256 hours | 4 pkts | 7 volts |
| 1735043974 | 24 *C | 68 % | 256 hours | 3 pkts | 7 volts |
| 1735043057 | 24 *C | 68 % | 256 hours | 4 pkts | 7 volts |
| 1735040304 | 24 *C | 68 % | 256 hours | 4 pkts | 7 volts |
| 1735039386 | 24 *C | 68 % | 256 hours | 3 pkts | 7 volts |
| 1735038469 | 24 *C | 67 % | 256 hours | 4 pkts | 7 volts |
| 1735037550 | 24 *C | 68 % | 256 hours | 3 pkts | 7 volts |
| 1735036632 | 24 *C | 68 % | 256 hours | 4 pkts | 7 volts |
| 1735035713 | 24 *C | 67 % | 256 hours | 3 pkts | 6.1 volts |
*Used Equation Coefficients:
Temp: 0, 1, 0
U.Rel.: 0, 1, 0
UpTime: 0, 1, 0
Pkts: 0, 1, 0
VCC: 0, 0.1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)