RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

9W2PEF-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object 9W2PEF-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RSSI*	Voltage*
1734969160	-49 dBm	12.06 V
1734968536	-47 dBm	12 V
1734967912	-50 dBm	12.02 V
1734967288	-53 dBm	12.02 V
1734966664	-52 dBm	12.06 V
1734966041	-53 dBm	12.02 V
1734965416	-50 dBm	12.08 V
1734964793	-49 dBm	12.02 V
1734964169	-55 dBm	12.06 V
1734963545	-51 dBm	12.06 V
1734962921	-51 dBm	12.06 V
1734962298	-49 dBm	12.02 V
1734961673	-50 dBm	12.02 V
1734961049	-49 dBm	12.06 V
1734960425	-46 dBm	12.02 V
1734959801	-50 dBm	12.06 V
1734959177	-49 dBm	12.06 V
1734958553	-47 dBm	12.08 V
1734957929	-49 dBm	12.02 V
1734957305	-47 dBm	12.02 V
1734956681	-49 dBm	12.02 V
1734956057	-53 dBm	12 V
1734955433	-53 dBm	12.02 V
1734954809	-46 dBm	12 V
1734954185	-49 dBm	12.06 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)