RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

SR9NSK-5 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SR9NSK-5. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Rx10min*	Tx10min*	Digi10min*	Tempre*
1734902451	95 Pkt	3 Pkt	0 Pkt	22.5 DegC
1734901848	94 Pkt	2 Pkt	0 Pkt	22.5 DegC
1734901248	110 Pkt	3 Pkt	0 Pkt	22 DegC
1734900046	99 Pkt	3 Pkt	0 Pkt	22 DegC
1734899444	92 Pkt	2 Pkt	0 Pkt	21.5 DegC
1734898845	102 Pkt	3 Pkt	0 Pkt	21.5 DegC
1734898736	103 Pkt	2 Pkt	0 Pkt	21.5 DegC
1734897642	116 Pkt	3 Pkt	0 Pkt	21.5 DegC
1734896437	116 Pkt	3 Pkt	0 Pkt	21.5 DegC
1734895835	110 Pkt	2 Pkt	0 Pkt	21.5 DegC
1734895235	112 Pkt	3 Pkt	0 Pkt	21.5 DegC
1734894633	91 Pkt	6 Pkt	0 Pkt	21.5 DegC
1734894024	79 Pkt	4 Pkt	0 Pkt	21.5 DegC
1734893422	70 Pkt	2 Pkt	0 Pkt	21.5 DegC
1734892821	94 Pkt	5 Pkt	2 Pkt	21.5 DegC
1734892220	105 Pkt	6 Pkt	4 Pkt	21 DegC
1734891619	103 Pkt	5 Pkt	2 Pkt	21 DegC
1734891017	50 Pkt	2 Pkt	0 Pkt	21 DegC
1734890417	81 Pkt	7 Pkt	3 Pkt	21 DegC
1734889813	81 Pkt	3 Pkt	1 Pkt	20.5 DegC
1734889213	48 Pkt	3 Pkt	0 Pkt	20.5 DegC
1734888611	44 Pkt	2 Pkt	0 Pkt	20.5 DegC
1734888012	45 Pkt	3 Pkt	0 Pkt	20.5 DegC
1734887409	66 Pkt	3 Pkt	0 Pkt	20.5 DegC
1734886809	83 Pkt	3 Pkt	0 Pkt	20.5 DegC

*Used Equation Coefficients:

Rx10min: 0, 1, 0

Tx10min: 0, 1, 0

Digi10min: 0, 1, 0

HostTx10m: 0, 1, 0

Tempre: 0, 0.5, -50

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)