This is the latest recevied telemetry packets stored in our database for station/object E20ZNR-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | RxTraffic* | TxTraffic* | RxDrop* | RSSI* | SUN* |
|---|---|---|---|---|---|
| 1734921590 | 14 Pkt | 0 Pkt | 1 Pkt | -72 dBm | 62 % |
| 1734920665 | 12 Pkt | 2 Pkt | 1 Pkt | -72 dBm | 61 % |
| 1734919740 | 13 Pkt | 0 Pkt | 0 Pkt | -71 dBm | 61 % |
| 1734918815 | 10 Pkt | 0 Pkt | 0 Pkt | -71 dBm | 71 % |
| 1734917891 | 11 Pkt | 0 Pkt | 0 Pkt | -72 dBm | 67 % |
| 1734916966 | 11 Pkt | 0 Pkt | 0 Pkt | -72 dBm | 62 % |
| 1734916040 | 13 Pkt | 0 Pkt | 0 Pkt | -71 dBm | 70 % |
| 1734915115 | 10 Pkt | 0 Pkt | 0 Pkt | -72 dBm | 55 % |
| 1734914190 | 10 Pkt | 0 Pkt | 0 Pkt | -72 dBm | 56 % |
| 1734913265 | 9 Pkt | 0 Pkt | 0 Pkt | -71 dBm | 50 % |
| 1734912341 | 10 Pkt | 0 Pkt | 0 Pkt | -72 dBm | 49 % |
| 1734911416 | 10 Pkt | 0 Pkt | 0 Pkt | -70 dBm | 33 % |
| 1734910492 | 10 Pkt | 0 Pkt | 0 Pkt | -70 dBm | 11 % |
| 1734909567 | 8 Pkt | 0 Pkt | 0 Pkt | -72 dBm | 0 % |
| 1734908642 | 20 Pkt | 0 Pkt | 0 Pkt | -72 dBm | 0 % |
| 1734907697 | 19 Pkt | 0 Pkt | 0 Pkt | -75 dBm | 0 % |
| 1734906772 | 36 Pkt | 0 Pkt | 0 Pkt | -73 dBm | 0 % |
| 1734905847 | 9 Pkt | 1 Pkt | 1 Pkt | -74 dBm | 0 % |
| 1734904923 | 14 Pkt | 0 Pkt | 0 Pkt | -73 dBm | 0 % |
| 1734903998 | 10 Pkt | 0 Pkt | 0 Pkt | -73 dBm | 0 % |
| 1734903074 | 12 Pkt | 0 Pkt | 0 Pkt | -73 dBm | 0 % |
| 1734902149 | 8 Pkt | 0 Pkt | 0 Pkt | -74 dBm | 0 % |
| 1734901224 | 12 Pkt | 0 Pkt | 0 Pkt | -74 dBm | 0 % |
| 1734900299 | 12 Pkt | 0 Pkt | 0 Pkt | -75 dBm | 0 % |
| 1734899375 | 10 Pkt | 0 Pkt | 0 Pkt | -74 dBm | 0 % |
*Used Equation Coefficients:
RxTraffic: 0, 1, 0
TxTraffic: 0, 1, 0
RxDrop: 0, 1, 0
RSSI: 0, -1, 0
SUN: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)