This is the latest recevied telemetry packets stored in our database for station/object KK7FIU-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Vin* | Rx1h* | Dg1h* | Eff1h* | Value5* |
|---|---|---|---|---|---|
| 1734980623 | 13.5 Volt | 10 Pkt | 0 Pkt | 8 Pcnt | 0 |
| 1734977023 | 13.58 Volt | 10 Pkt | 0 Pkt | 10 Pcnt | 0 |
| 1734973424 | 13.58 Volt | 100 Pkt | 0 Pkt | 57 Pcnt | 0 |
| 1734969824 | 13.58 Volt | 150 Pkt | 0 Pkt | 74 Pcnt | 0 |
| 1734966224 | 13.65 Volt | 180 Pkt | 0 Pkt | 95 Pcnt | 0 |
| 1734962624 | 13.5 Volt | 190 Pkt | 0 Pkt | 95 Pcnt | 0 |
| 1734959024 | 13.58 Volt | 190 Pkt | 0 Pkt | 97 Pcnt | 0 |
| 1734955424 | 13.58 Volt | 180 Pkt | 0 Pkt | 96 Pcnt | 0 |
| 1734951824 | 13.5 Volt | 190 Pkt | 0 Pkt | 99 Pcnt | 0 |
| 1734948224 | 13.65 Volt | 190 Pkt | 0 Pkt | 96 Pcnt | 0 |
| 1734944624 | 13.5 Volt | 170 Pkt | 0 Pkt | 96 Pcnt | 0 |
| 1734941024 | 13.58 Volt | 160 Pkt | 0 Pkt | 91 Pcnt | 0 |
| 1734937425 | 13.58 Volt | 180 Pkt | 0 Pkt | 93 Pcnt | 0 |
| 1734930224 | 13.58 Volt | 160 Pkt | 0 Pkt | 91 Pcnt | 0 |
| 1734926624 | 13.58 Volt | 160 Pkt | 0 Pkt | 93 Pcnt | 0 |
| 1734923024 | 13.65 Volt | 210 Pkt | 0 Pkt | 95 Pcnt | 0 |
| 1734919424 | 13.5 Volt | 160 Pkt | 0 Pkt | 97 Pcnt | 0 |
| 1734915825 | 13.58 Volt | 170 Pkt | 0 Pkt | 95 Pcnt | 0 |
| 1734912225 | 13.58 Volt | 120 Pkt | 0 Pkt | 58 Pcnt | 0 |
| 1734908625 | 13.58 Volt | 0 Pkt | 0 Pkt | 2 Pcnt | 0 |
| 1734905025 | 13.58 Volt | 70 Pkt | 0 Pkt | 31 Pcnt | 0 |
| 1734901425 | 13.5 Volt | 70 Pkt | 0 Pkt | 39 Pcnt | 0 |
| 1734897825 | 13.58 Volt | 40 Pkt | 0 Pkt | 23 Pcnt | 0 |
*Used Equation Coefficients:
Vin: 0, 0.075, 0
Rx1h: 0, 10, 0
Dg1h: 0, 10, 0
Eff1h: 0, 1, 0
Value5: 0, 0, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)