RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

HS6YHE-2 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HS6YHE-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	RSSI*	Voltage*
1734918961	-40 dBm	3.06 V
1734917136	-43 dBm	3.08 V
1734915311	-43 dBm	3.55 V
1734913486	-38 dBm	3.71 V
1734911660	-41 dBm	3.55 V
1734909835	-39 dBm	3.65 V
1734908010	-41 dBm	3.71 V
1734906185	-43 dBm	3.61 V
1734904360	-44 dBm	3.45 V
1734902535	-47 dBm	3.24 V
1734898884	-42 dBm	3.49 V
1734897059	-41 dBm	3.49 V
1734895233	-41 dBm	3.45 V
1734893408	-42 dBm	3.4 V
1734891583	-41 dBm	3.32 V
1734889758	-40 dBm	3.34 V
1734887932	-41 dBm	3.26 V
1734886107	-45 dBm	3.24 V
1734884281	-43 dBm	3.16 V
1734882456	-41 dBm	3.08 V
1734880631	-43 dBm	3.08 V
1734878806	-43 dBm	3.06 V
1734876980	-45 dBm	2.56 V
1734875155	-43 dBm	2.79 V
1734873330	-44 dBm	2.77 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)